
Journal Paper
1. Zhenhua Niu, Mohammad Hossein Razavi Dehkordi, Mohammadreza Ghazi, Mohammad Akbari, "Hybrid modeling and optimization of fiber laser hole cutting of austenitic stainless-steel sheets using response surface", Laser Physics, Vol 34, 2024, PP.045602 Status: Unavailable PDF 2. Yuelei Zhang, Mohammad Hossein Razavi Dehkordi, Mohammad Javad Kholoud , Hamidreza Azimy, Z Li, Mohammad Akbari, "Numerical modeling of the temperature distribution and melt flow in dissimilar fiber laser welding of duplex stainless steel 2205 and low alloy steel", Optics and Laser Technology, Vol 174, 2024, PP.110575 Status: Unavailable PDF 3. Mohammad Behzad Botlani Esfahani, Arash Karimipour, Mohammad Akbari, Ali Abdollahi, Mohammad Najafi, "Experimental and numerical investigation of dissimilar weld characterization in laser welding of duplex 2205 and AISI 1060 steel: Microstructure, mechanical properties and weld geometry", Heliyon, Vol 10, 2024, PP.e40899 Status: Available PDF 4. Akbar Zarei, Mohammad Akbari, Ali Abdollahi, Hamid Soleimanimehr, "Experimental and numerical study of dissimilar fiber laser welding of martensitic AISI 1060 carbon steel with different configuration with austenitic 304 and ferritic 420 stainless steel", Heliyon, Vol 10, 2024, PP.e39954 Status: Available PDF 5. Mohammad Hossein Razavi Dehkordi, Noushin Azimy, Shahab Naghdi Sedeh, Hamidreza Azimy, Seyed Amir Mohammad Ahmadi, Mohammad Akbari, "Influence of rotating magnetic field on thermal field and entropy generation of a tube containing the nanofluid using mixture model", Alexandria Engineering Journal, Vol 106, 2024, PP.367-379 Status: Available PDF 6. Ahmad Reza Abbasian, Mohammad Hossein Razavi Dehkordi, Noushin Azimy, Hamidreza Azimy, Mohammad Akbari, Badreddine Ayadi, Walid Aich, Lioua Kolsi, "Experimental study of preparing the CoFe2O4 magnetic nanofluid and measuring thermal-fluid characteristics of the stabilized magnetocaloric nanofluid", Materials Science, Vol 306, 2024, PP.117462 Status: Unavailable PDF 7. Mohammad Akbari, Saeed Daneshmand, Mohammad Heydari Vini, Hamidreza Azimy, "Effect of roasting process on the V (anti-tumor agent) recovery from the slag of the electric arc furnace (EAF)", Heliyon, Vol 10, 2024, PP.e31986 Status: Available PDF 8. Shahram Karimi, Amir Homayoon Meghdadi Isfahani, Masoud Afrand, Mohammad Akbari, "Empirical investigation of the effect of adding nanoparticles to HB-80 gas turbine oil: Evaluation of thermophysical behaviors", Heliyon, Vol 10, 2024, PP.e31986 Status: Available PDF 9. Ahmad Soleimani, Mohammad Akbari, Arash Karimipour, Amir Homayoon Meghdadi Isfahani, Reza Nosouhi, "Investigation the effect of dissimilar laser welding parameters on temperature field, mechanical properties and fusion zone microstructure of inconel 600 and duplex 2205 stainless steel via response surface methodology", Heliyon, Vol 10, 2024, PP.e26010 Status: Available PDF 10. Sajjad Hamzeei, Shahab Naghdi Sedeh, Noushin Azimy, Mohammad Akbari, Seyed Amir Mohammad Ahmadi, "The effect of alphabet-shaped twisted tape on thermo-fluidic properties in a shell-tube type heat exchanger: A comparative study utilizing a two-phase mixture model", Engineering Analysis with Boundary Elements, Vol 159, 2024, PP.122-137 Status: Unavailable PDF 11. Mohammad Hossein Razavi Dehkordi, .Dheyaa J Jasim, .Ameer H Al-Rubaye, Mohammad Akbari, Seyed Amin Bagherzadeh, Mohammadreza Ghazi, Hamed Mohammadkarimi, "Modeling and multiobjective optimization of thermal effects of fiber laser cutting of Inconel 600 sheet by employing the ANN and multi-objective PSO algorithm", Journal of Laser Applications, Vol 35, 2023, PP.042060-1-14 Status: Unavailable PDF 12. Mohammad Hossein Razavi Dehkordi, Amir Homayoon Meghdadi Isfahani, Ehsan Rasti, Reza Nosouhi, Mohammad Akbari, Mehdi Jahangiri , "Energy Economic Environmental assessment of solar wind biomass systems for finding the best areas in Iran A case study using GIS maps", Sustainable Energy Technologies and Assessments, Vol 53, 2022, PP.102652 Status: Available PDF 13. Abdolmajid Taghipour, Arash Karimipour, Masoud Afrand, Somaye Yaghoubi, Mohammad Akbari, "Magnetic field effects on O2/Ar liquidflow through a platinum micro-channel via dissipative particle molecular dynamics approach", Journal of Molecular Liquids, Vol 326, 2021, PP.115286 Status: Available PDF 14. Reza Balali Dehkordi, Davood Toghraie, Mohammad Hashemian, Farshid Aghadavoudi, Mohammad Akbari, "The effects of external force and electrical field on the agglomeration of Fe3O4 nanoparticles in electroosmotic flows in microchannels using molecu", International Communications in Heat and Mass Transfer, Vol 122, 2021, PP.105182 Status: Available PDF 15. Reza Balali Dehkordi, Davood Toghraie, Mohammad Hashemian, Farshid Aghadavoudi, Mohammad Akbari, "Molecular dynamics simulation of ferro-nanofluid flow in a microchannel in the presence of external electric field: Effects of Fe3O4nanoparticles", International Communications in Heat and Mass Transfer, Vol 116, 2020, PP.104653 Status: Available PDF 16. Hamidreza Heydari, Mohammad Akbari, "Investigating the effect of process parameters on the temperature field and mechanical properties in pulsed laser welding of Ti6Al4V alloy sheet using", Infrared Physics, Vol 106, 2020, PP.103267 Status: Available PDF 17. Dai Xiaohong, Chen Huajiang, Seyed Amin Bagherzadeh, Masoud Shayan, Mohammad Akbari, "Statistical estimation the thermal conductivity of MWCNTs-SiO2/Water-EG nanofluid using the ridge regression method", Physica A: Statistical Mechanics and its Applications, Vol 537, 2020, PP.122782 Status: Unavailable PDF 18. Rasool Kalbasi, Seyed Mohammadhadi Alaeddin, Mohammad Akbari, Masoud Afrand, "Analytical Solution of Heat Conduction in a Symmetrical Cylinder Using the Solution Structure Theorem and Superposition Technique", symmetry, Vol 11-12, 2019, PP.1-12 Status: Unavailable PDF 19. Maziar Sharifi, Mohammad Akbari, "Experimental investigation of the effect of process parameters on cutting region temperature and cutting edge quality in laser cutting of AL6061T6 all", Optik - International Journal for Light and Electron Optics, Vol 184, 2019, PP.457-463 Status: Available PDF 20. Ali Jahangiri, Samira Mohammadi, Mohammad Akbari, "Modeling the one-dimensional inverse heat transfer problem using a Haar wavelet collocation approach", Physica A: Statistical Mechanics and its Applications, Vol 525, 2019, PP.26–13 Status: Available PDF 21. Mehrdad Bahrami, Mohammad Akbari, Seyed Amin Bagherzadeh, Arash Karimipour, Masoud Afrand, Marjan Goodarzi, "Develop 24 dissimilar ANNs by suitable architectures", Physica A: Statistical Mechanics and its Applications, Vol 519, 2019, PP.168–159 Status: Available PDF 22. Yuancheng Geng, Mohammad Akbari, Arash Karimipour, Alireza Karimi, Ahmad Soleimani, Masoud Afrand, "Effects of the laser parameters on the mechanical properties and microstructure of weld joint in dissimilar pulsed laser welding of AISI 304 and AISI", Infrared Physics , Vol 103, 2019, PP.103081 Status: Unavailable PDF 23. Dezhi Jiang, Ali Sulaiman Alsagri, Mohammad Akbari, Masoud Afrand, Abdulrahman A Alrobaian, "Numerical and experimental studies on the effect of varied beam diameter, average power and pulse energy in Nd: YAG laser welding of Ti6Al4V", Infrared Physics , Vol 101, 2019, PP.188–180 Status: Unavailable PDF 24. Abdullah A.A.A Al-Rashed, Amin Shahsavar, Mohammad Akbari, Davood Toghraie, Mohammadreza Akbari, Masoud Afrand, "Finite Volume Simulation of mixed convection in an inclined lid-driven cavity filled with nanofluids: Effects of a hot elliptical centric cylinder, ca", Physica A: Statistical Mechanics and its Applications, Vol 527, 2019, PP.121122 Status: Unavailable PDF 25. Ashkan Afshari, Mohammad Akbari, Davood Toghraie, Mohammad Eftekhari Yazdi, "Experimental investigation of rheological behavior of the hybrid nanofluid of MWCNT–alumina/water (80%)–ethylene-glycol (20%)", Journal of Thermal Analysis and Calorimetry, Vol 132-2, 2018, PP.1015–1001 Status: Available PDF 26. Bijan Karbasifar, Mohammad Akbari, Davood Toghraie, "Mixed convection of Water-Aluminum oxide nanofluid in an inclined lid-driven cavity containing a hot elliptical centric cylinder", International Journal of Heat and Mass Transfer, Vol 116, 2018, PP.1237-1249 Status: Available PDF 27. Amir Parsian, Mohammad Akbari, "New experimental correlation for the thermal conductivity of ethylene glycol containing Al2O3–Cu hybrid nanoparticles", Journal of Thermal Analysis and Calorimetry, Vol 131, 2018, PP.1613–1605 Status: Available PDF 28. Mohammad Hashem Mirbagheri, Mohammad Akbar, Babak Mehmandoust, "Proposing a new experimental correlation for thermal conductivity of nanofluids containing of functionalized multiwalled carbon nanotubes suspended in", International Communications in Heat and Mass Transfer, Vol 98, 2018, PP.216-222 Status: Available PDF 29. Masoud Shayan, Mohammad Akbari, "New experimental correlation for the thermal conductivity of MWCNTs-SiO2/water-EG in various solid volume fractions and temperatures", Journal of Thermal Analysis and Calorimetry, Vol 134, 2018, PP.2287–2294 Status: Available PDF 30. Amir Hussein Saeedi, Mohammad Akbari, Davood Toghraie, "An experimental study on rheological behavior of a nanofluid containing oxide nanoparticle and proposing a new correlation", Physica E: Low-dimensional Systems and Nanostructures, Vol 99, 2018, PP.285-293 Status: Available PDF 31. Amir Kakavandi, Mohammad Akbari, "Experimental investigation of thermal conductivity of nanofluids containing of hybrid nanoparticles suspended in binary base fluids and propose a new", International Journal of Heat and Mass Transfer, Vol 124, 2018, PP.742-751 Status: Available PDF 32. Mohammad Akbari, Masoud Afrand, Ali Arshi, Arash Karimipour, "An experimental study on rheological behavior of ethylene glycol based nanofluid: Proposing a new correlation as a function of silica concentration an", Journal of Molecular Liquids, Vol 233, 2017, PP.352–357 Status: Available PDF 33. Akbar Zareie, Mohammad Akbari, "Hybrid nanoparticles effects on rheological behavior of water-EG coolant under different temperatures: An experimental study", Journal of Molecular Liquids, Vol 230, 2017, PP.408-414 Status: Available PDF 34. Masoud Afrand, Arash Karimipour, Afshin Ahmadi Nadooshan, Mohammad Akbari, "The variations of heat transfer and slip velocity of FMWNT-water nano-fluid along the micro-channel in the lack and presence of a magnetic field", Physica E: Low-dimensional Systems and Nanostructures, Vol 84, 2016, PP.474-481 Status: Available PDF 35. Mehrdad Bahrami, Mohammad Akbari, Arash Karimipour, Masoud Afrand, "An experimental study on rheological behavior of hybrid nanofluids made of iron and copper oxide in a binary mixture of water and ethylene glycol: Non", Experimental Thermal and Fluid Science, Vol 79, 2016, PP.231-237 Status: Available PDF 36. Omid Soltani, Mohammad Akbari, "Effects of temperature and particles concentration on the dynamic viscosity of MgO-MWCNT/ethylene glycol hybrid nano fl uid: Experimental study", Physica E: Low-dimensional Systems and Nanostructures, Vol 84, 2016, PP.564-570 Status: Available PDF 37. Masoud Afrand, Karim Nazari Najafabadi, Mohammad Akbari, "Effects of temperature and solid volume fraction on viscosity of SiO2-MWCNTs/SAE40 hybrid nanofluid as a coolant and lubricant in heat engines", Applied Thermal Engineering, Vol 102, 2016, PP.45-54 Status: Available PDF 38. Mohammad Akbari, Seyfolah Saedodin, Afshin Panjehpour, Mohsen Hassani, Masoud Afrand, Mohammad Javad Torkamany, "Numerical simulation and designing artificial neural network for estimating melt pool geometry and temperature distribution in laser welding of Ti6Al4", Optik, Vol 127-2, 2016, PP.11172–11161 Status: Available PDF 39. Mohammad Hemmat Esfe, Arash Karimipour, Wei-Mon Yan, Mohammad Akbari, Mohammad Reza Safaei, Mahidzal Dahari, "Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al2O3 nanoparticles", International Journal of Heat and Mass Transfer, Vol 88, 2015, PP.728-734 Status: Available PDF 40. mohammad Hemmat Esfe, mohammad akbari, Arash Karimipour, Masoud Afrand, Omid Mahian, Somchai Wongwises, "Mixed-convection flow and heat transfer in an inclined cavity equipped to a hot obstacle using nanofluids considering temperature-dependent properties", International Journal of Heat and Mass Transfer, Vol 85, 2015, PP.656-666 Status: Available PDF 41. Mohammad Hemmat Esfe, Ali Naderi, Mohammad Akbari, Masoud Afrand, Arash Karimipour, "Evaluation of thermal conductivity of COOH-functionalized MWCNTs/water via temperature and solid volume fraction by using experimental data and ANN me", Journal of Thermal Analysis and Calorimetry, Vol 118, 2015, PP.1-6 Status: Available PDF 42. Mostafa Mahmoodi, Mohammad Hemmat Esfe, Mohammad Akbari, Arash Karimipour, Masoud Afrand, "Magneto-natural convection in square cavities with a source-sink pair on different walls", International Journal of Applied Electromagnetics and Mechanics, Vol 47, 2015, PP.21-32 Status: Available PDF 43. Mohammad Hemmat Esfe, Seyfolah Saedodin, Mohammad Akbari, Arash Karimipour, Masoud Afrand, Somchai Wongwises, Mohammad Reza Safaei, Mahidzal Dahari, "Experimental investigation and development of new correlations for thermal conductivity of CuO/EG–water nanofluid", International Communications in Heat and Mass Transfer, Vol 65, 2015, PP.47-51 Status: Available PDF 44. Mohammad Hemmat Esfe, Masoud Afrand, Wei Mon Yan, Mohammad Akbari, "Applicability of artificial neural network and nonlinear regression to predict thermal conductivity modeling of Al2O3–water nanofluids using experimen", International Communications in Heat and Mass Transfer, Vol 66, 2015, PP.246-249 Status: Available PDF 45. Masoud Afranda, Sara Rostami, Mohammad Akbari, Somchai Wongwises, Mohammad Hemmat Esfe, Arash Karimipour, "Effect of induced electric field on magneto-natural convection in a vertical cylindrical annulus filled with liquid potassium", International Journal of Heat and Mass Transfer, Vol 90, 2015, PP.418-426 Status: Unavailable PDF 46. Mohammad Hemmat Esfe, Mohammad Akbari, Arash Karimipour, "MIXED CONVECTION IN A LID-DRIVEN CAVITY WITH AN INSIDE HOT OBSTACLE FILLED BY AN Al2O3–WATER NANOFLUID", Journal of Applied Mechanics and Technical Physics, Vol 56, 2015, PP.443-453 Status: Available PDF 47. Mohammad Hemmat Esfe, Mon Yan Wei, Mohammad Akbari, Arash Karimipour, Mohsen Hassani, "Experimental study on thermal conductivity of DWCNT-ZnO/ water-EG nanofluids", International Communications in Heat and Mass Transfer, Vol 68, 2015, PP.248-251 Status: Available PDF 48. Mohammad Hemmat Esfe, Masoud Afrand, Somchai Wongwises, Ali Naderi, Amin Asadi, Sara Rostami, Mohammad Akbari, "Applications of feedforward multilayer perceptron artificial neural networks and empirical correlation for prediction of thermal conductivity of Mg(OH", International Communications in Heat and Mass Transfer, Vol 67, 2015, PP.46-50 Status: Available PDF 49. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohammad Hussein Razavi, Mohammad akbari, Masoud Afrand, Iman Golshokouh, "Thermodynamic analyzes of film cooling for a restructured cooling holes at the end of gas turbine engine combustor", International Journal of Mechanics , Vol 9, 2015, PP.11-15 Status: Available PDF 50. Saeid Jani, Mostafa Mahmoodi, Meysam Amini, Mohammad Akbari, "FREE CONVECTION IN RECTANGULAR ENCLOSURES CONTAINING NANOFLUID WITH NANOPARTICLES OF VARIOUS DIAMETERS", Heat transfer research, Vol 45, 2014, PP.145-169 Status: Available PDF 51. Mohammad Reza Heydari, Mohammad Hemmat Esfe, Mohammad Hadi Hajmohammad, Mohammad Akbari, Seyed Sadegh Mirtalebi Esforjani, "Mixed convection heat transfer in a double lid-driven inclined square enclosure subjected to Cu / Water nanofluid with particle diameter of 90 nanome", Heat transfer research, Vol 45, 2014, PP.75-95 Status: Available PDF 52. Mohammad Hemmat Esfe, Mohammad Akbari, Davood Toghraie, Arash Karimipour, Masoud Afrand, "EFFECT OF NANOFLUID VARIABLE PROPERTIES ON MIXED CONVECTION FLOW AND HEAT TRANSFER IN AN INCLINED TWO-SIDED LID-DRIVEN CAVITY WITH SINUSOIDAL HEATING", Heat Transfer Research, Vol 45, 2014, PP.409-432 Status: Available PDF 53. Mohammad Hemmat Esfe, Seyed Sadegh Mirtalebi Esforjani, Mohammad Akbari, "MIXED CONVECTION FLOW AND HEAT TRANSFER IN A LID-DRIVEN CAVITY SUBJEXTED TO NANOFLUID: EFFECT OF TEMPERATURE, CONCENTRATION AND CAVITY INCLINATION ANG", Heat Transfer Research, Vol 45, 2014, PP.453-470 Status: Available PDF 54. Mohammad Hemmat Esfe, Somchai Wongwises, Amin Asadi, Mohammad Akbari, "Fake Journals: Their Features and Some Viable Ways to Distinguishing Them", Science and Engineering Ethics, Vol 1, 2014, PP.1-4 Status: Available PDF 55. Mohammad Hemmat Esfe, Seyed Sadegh Mirtalebi Esforjani, Mohammad Akbari, Arash Karimipour, "Mixed-convection flow in a lid-driven square cavity filled with a nanofluid with variable properties: Effect of the nanoparticle diameter and of the p", Heat Transfer Research, Vol 45-6, 2014, PP.563–578 Status: Available PDF 56. Mohammad Hemmat Esfe, Somchai Wongwises, Amin Asadi, Arash Karimipour, Mohammad Akbari, "Mandatory and Self-citation; Types, Reasons, Their Benefits and Disadvantages", SCIENCE AND ENGINEERING ETHICS, Vol 28, 2014, PP.1-5 Status: Available PDF 57. Mohammad Hemmat Esfe, Seyed Sadegh Mirtalebi, Mohammad Akbari, Mohammad Hadi Hajmohammad, "NUMERICAL SIMULATION OF MIXED CONVECTION IN A SiO2/WATER NANOFLUID IN A TWO–SIDED LID-DRIVEN SQUARE ENCLOSURE WITH SINUSOIDAL BOUNDARY CONDITIONS ON T", Heat Transfer Research, Vol 45, 2014, PP.677-700 Status: Available PDF 58. mohammad Hemmat Esfe, Sina Niazi, Seyed Sadegh Mirtalebi Esforjani, Mohammad Akbari, "Mixed convection flow and heat transfer in a ventilated inclined cavity containing hot obstacles subjected to a nanofluid", heat transfer research, Vol 45, 2014, PP.309-338 Status: Available PDF 59. Mohammad Hemmat Esfe, Arian Zare Ghadi, Seyed Sadegh Mirtalebi, Mohammad Akbari, "Combined Convection in a Lid-Driven Cavity with an Inside Obstacle Subjected to Al2O3-Water nanofluid: Effect of Solid Volume Fraction and nanofluid", ACTA PHYSICA POLONICA A, Vol 124, 2013, PP.665-672 Status: Available PDF 60. Mohammad Hemmat Esfe, Hossein Molaie, Mohammad Akbari, Seyed Hadi Rostamian, "INVESTIGATION OF HEAT TRANSFER ON A CAVITY CONTAINING A HEATED CIRCULAR FOR TWO TYPES OF NANOFLUIDS WITH DIFFERENT VALUES OF VOLUME FRACTION", JOURNAL OF CURRENT RESEARCH IN SCIENCE, Vol 1, 2013, PP.154-156 Status: Available PDF 61. Mohammad Akbari, Mohammad Hemmat Esfe, Seyed Hadi Rostamian, Arash Karimipour, "NON FOURIER HEAT CONDUCTION IN A SEMI INFINITE BODY EXPOSED TO THE PULSATILE AND CONTINUOUS HEAT SOURCES", JOURNAL OF CURRENT RESEARCH IN SCIENCE, Vol 1, 2013, PP.144-150 Status: Available PDF 62. Mohammad Hemmat Esfe, Mohammad Akbari, Seyed Hadi Rostamian, "EFFECT OF RAYLEIGH NUMBER ON MIXED CONVECTION FLOW AND HEAT TRANSFER IN AN INCLINED TWO-SIDED LID-DRIVEN CAVITY SUBJECTED TO A VARIABLE PROPERTIES NAN", JOURNAL OF CURRENT RESEARCH IN SCIENCE, Vol 1, 2013, PP.123-129 Status: Available PDF 63. Akbar Zareie, Mohammad Akbari, "Experimental investigation of viscosity of MgO-MWCNTs hybrid nanofluid in Water- EG base fluid", Modares Mechanical Engineering, Vol 16-6, 2016, PP.199-204 Status: Unavailable PDF 64. Mohammad Akbari, Amirhossein Saeedi, "Measuring the viscosity of nanofluids cerium oxide-ethylene glycol in fractions - volume and different temperatures and provided experimental new rela", Journal of Solid Mechanics in engineering, Vol 8-2, 2015, PP.89-96 Status: Available PDF |
Conference Paper