Journal Paper

1. Fatemeh Mianzarasvand, Alireza Shirneshan, Masoud Afrand, "Effect of electrically heated catalytic converter on emission characteristic of a motorcycle engine in cold-start conditions: CFD simulation and kinet", Applied Thermal Engineering, Vol 127, 2017, PP.453-464
    Status: Unavailable PDF
2. Ramin Ranjbarzadeh, Arash Karimipour, Masoud Afrand, Amir Homayoon Meghdadi Isfahani, Alireza Shirneshan, "Empirical analysis of heat transfer and friction factor of water/graphene oxide nanofluid flow in turbulent regime through an isothermal pipe", Applied Thermal Engineering, Vol 126, 2017, PP.538–547
    Status: Unavailable PDF
3. Mohammad Javad Saheban Alahadi, Alireza Shirneshan, Mojtaba Kolahdoozan, "Experimental investigation of the effect of grooves cut over the piston surface on the volumetric efficiency of a radial hydraulic piston pump", International Journal of Fluid Power, Vol 18(3), 2017, PP.181–187
    Status: Unavailable PDF
4. Alireza Shirneshan, Bahram Hosseinzadeh Samani, Barat Ghobadian, "Optimization of biodiesel percentage in fuel mixture and engine operating conditions for diesel engine performance and emission characteristics by Art", Fuel, Vol 184, 2016, PP.518–526
    Status: Unavailable PDF
5. Alireza Shirneshan, Hossein Jamalvand, "Numerical investigation of combustion of biomass, methane, and gasoil fuels and emissions from a furnace chamber", Energy and Policy Research, Vol 3(1), 2016, PP.19-26
    Status: Unavailable PDF
6. Alireza Shirneshan, Hossein Jamalvand, "Modeling Gaseous Emissions from Peat (Biomass) and Diesel Fuels Combustion", Energy and Environment Focus, Vol (1)5, 2016, PP.70-76
    Status: Unavailable PDF
7. Alireza Shirneshan, Morteza Almassi, Barat Ghobadian, Ali Mohammad Borghei, Gholamhassan Najafi, "Response surface methodology (RSM) based optimization of biodiesel-diesel blends and investigation of their effects on diesel engine operating conditi", Environmental Engineering and Management Journal, Vol 15-12, 2016, PP.2771-2780
    Status: Unavailable PDF
8. Alireza Shirneshan, Morteza Almassi, Barat Ghobadian, Gholamhassan Najafi, "Modeling the effects of biodiesel-diesel fuel blends on CO2 emission of a diesel engine by response surface methodology", Caspian Journal of Environmental Sciences, Vol 14(3), 2016, PP.227-238
    Status: Unavailable PDF
9. Amin Nedayali, Alireza Shirneshan, "Experimental Study of the Effects of Biodiesel on the Performance of a Diesel Power Generator", Energy and Environment, Vol 27(5), 2016, PP.553-565
    Status: Unavailable PDF
10. Pouyan Alaei, Alireza Shirneshan, "Simulation the Effect of Oxygen-Enriched Air on the Performance Characteristics of a Gasoline Engine", Energy and Environment Focus, Vol 5(3), 2016, PP.215–221
    Status: Unavailable PDF
11. Alireza Shirneshan, Bahram Hosseinzadeh Samani, Amin Nedayali, "ANN Model to Predict the Performance of a Diesel Power Generator Fueled with Biodiesel", The Journal of Engine Research, Vol 42, 2016, PP.43-50
    Status: Unavailable PDF
12. Hossein Jamalvand, Alireza Shirneshan, "A Comparison of CO2, NOX and SO2 Emissions from Combustion of a Biomass Fuel and Methane in Furnace Combustion Chamber", International Journal of Mechanical Engineering and Automation, Vol 2(7), 2015, PP.306-311
    Status: Unavailable PDF
13. Alireza Shirneshan, Ali Hori Najafabad, Bahram Hosseinzadeh Samani, "Determination the Mechanical Stress on the Cutter Bar of the Harvesting Combine by Abaqus", Journal of Modern Processes in Manufacturing and Production, Vol 3(2), 2015, PP.77-86
    Status: Unavailable PDF
14. Alireza Shirneshan, "Measurement of Petiole Shear Strength of Some Tree Species", International Journal of Mechanical Engineering and Automation, Vol 2(11), 2015, PP.510-513
    Status: Unavailable PDF
15. Alireza Shirneshan, "Brake Power of a Diesel Engine by Using Biodiesel from Waste frying Oil", BRIS Journal of Advances in Science, Vol 2, 2014, PP.18-22
    Status: Unavailable PDF
16. Alireza Shirneshan, Morteza Almassi, Barat Ghobadian, Gholamhassan Najafi, "Investigating the Effects of Biodiesel from Waste Cooking Oil and Engine Operating Conditions on the Diesel Engine Performance by Response Surface mET", IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, Vol 38, 2014, PP.289-301
    Status: Unavailable PDF
17. Alireza Shirneshan, "Hydrocarbon Pollutant Emitted From a Diesel Engine Fueled With Biodiesel and Diesel Fuel No.2", Energy Review, Vol 1(1), 2014, PP.19-25
    Status: Unavailable PDF
18. Alireza Shirneshan, Morteza Almassi, Barat Ghobadian, Ali Mohammad Borghei, Gholamhassan Najafi, "Brake Specific Fuel Consumption of Diesel Engine by Using Biodiesel from Waste Cooking Oil", World of Sciences Journal, Vol Speci, 2013, PP.45-52
    Status: Unavailable PDF
19. Alireza Shirneshan, "Brake torque of a diesel engine fuelled with biodiesel and diesel", International Journal of Renewable and Sustainable Energy, Vol 2(6), 2013, PP.242-246
    Status: Unavailable PDF
20. Alireza Shirneshan, Morteza Almassi, Barat Ghobadian, Borghei Borghei, Gholamhassan Najafi, "Effect of Waste Cooking Oil Methyl Ester, Engine Speed and Engine load on CO and NOx Emissions of a Diesel Engine", Life Science Journal, Vol 10(6s, 2013, PP.822-828
    Status: Unavailable PDF
21. Shirneshan Alireza, "MEASUREMENT OF AIR FLOW FOR LEAF SUCTION AND EFFECT OF RAKE ANGLE ON LEAF SHEARING FORCE", International Journal of Innovations in Bio-Sciences, Vol 2(1), 2012, PP.1-4
    Status: Unavailable PDF
22. Alireza Shirneshan, "DESIGN OF VACUUM SECTION OF A LEAF COLLECTOR MACHINE", International Journal of Innovations in Bio-Sciences, Vol 2(4), 2012, PP.181-185
    Status: Unavailable PDF
23. ALIREZA SHIRNESHAN, MORTEZA ALMASSI, BARAT GHOBADIAN, ALI MOHAMMAD BORGHEI, GHOLAM HASSAN NAJAFI, "Effects of Biodiesel and Engine Load on Some Emission Characteristics of a Direct Injection Diesel Engine", Current World Environment, Vol 7(2), 2012, PP.207-2012
    Status: Unavailable PDF
24. Bahram Hoseinzadeh, Alireza Shirneshan, "Bending and Shearing Characteristics of Canola Stem", Amer-Eurasian J Agri , Vol 12(3), 2012, PP.275-281
    Status: Unavailable PDF
25. Alireza Shirneshan, "Physical and Mechanical Properties of beans", Journal of American Science, Vol 7(5), 2011, PP.158-164
    Status: Unavailable PDF
26. Bahram Hosseinzadeh, Alireza Shirneshan, Hemad Zareiforoush, "The effect of different types of tillage on soil’s physical, mechanical, and biological properties", Researcher, Vol 3(7), 2011, PP.25-29
    Status: Unavailable PDF
27. Alireza Shirneshan, Mohammad Ali Ghazavi, Mehrdad Poursina, Bahram Hossein Zadeh, "Shear Strength and Area Density of the Leaves of Five Tree Species in Esfahan City", World Applied Science Journal, Vol 7(4), 2009, PP.515-521
    Status: Unavailable PDF

Conference Paper

1. Jalaleddin Ghezavati, Mahdi Abbasgholipour, Amirhosein Marzbanpour, Alireza Shirneshan, Amin Shadkam, "Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini", The First National Conference on Novel and Applied Approaches in Mechanical Engineering, Islamic Azad University, Bonab Branch, 2016
    Status: Available PDF
2. Amin Nedaiali, Alireza Shirneshan, "Investigation the Effect of Biodiesel-Diesel Blends on Performance Characteristics of the Diesel Generator Cat3412 ", 4th International Conference of Emerging Trensds in Energy Conservation, university of Tehran, 2015
    Status: Available PDF
3. Hossein Jamalvand, Alireza Shirneshan, " Numerical Study to Compare the Temperature Distribution in Conventional and Biomass Combustion", 3rd National Conference on the Mechanical Systems , Ahvaz Branch, Islamic Azad University, 2015
    Status: Available PDF
4. Hossein Jamalvand, Alireza Shirneshan, "A Study on Pollutant Emissions of Biomass in Combustion Chamber and Comparison with Conventional Fuels", First National Sustainable Development conference of Energy, water and Environment Engineering systems, Iran University of Science and Technology, 2015
    Status: Available PDF
5. Ahmad Ghaedi, Mohammad Hojaji, Alireza Shirneshan, "Numerical Analysis to Study the Effects of Fin at the Trailing Edge of the Airfoil", Modern Achievements on Aerospace and Related Sciences Conference , University of Tehran, 2015
    Status: Available PDF
6. Alireza Shirneshan, "Simulation of the blade of a Natural debris Shredder Machine by Abaqus", XXIV International Conference on Theory of Machines and Mechatronic Systems, Szklarska Poręba, Poland, 2014
    Status: Available PDF
7. Alireza Shirneshan, "HC, CO, CO2 and NOx Emission evaluation of a diesel engine fueled with waste frying oil methyl ester", 2nd International Conference on Leadership, Technology and Innovation Management, Istanbul, Turkey, 2012
    Status: Unavailable PDF
8. Alireza Shirneshan, Mohammad Ali Ghazavi, "Shearing Force of Some Leaves in Iranian Tree Gardens", IJAS Conference, Freiburg, Germany, 2011
    Status: Unavailable PDF