Journal Paper

1. Rezvan Fada, Mohamad Shahgholi, Majid Karimian, "Improving the Mechanical Properties of Strontium Nitrate Doped Dicalcium Phosphate Cement Nanoparticles for Bone Repair Application", Ceramics International, Vol 47, 2021, PP.14151-14159
    Status: Unavailable PDF
2. Mahsa Talebi, Shahrokh Abbasi rad, Malakeh Malekzadeh, Mohamad Shahgholi, Ali Ardakani, Kimia Foudeh, Hamidreza Saligheh-rad, "Cortical Bone Mechanical Assessment via Free Water Relaxometry at 3 T", Journal of Magnetic Resonance Imaging, Vol 54-6, 2021, PP.1744–1751
    Status: Unavailable PDF
3. Aliakbar Karimpour, Omid Malekahmadi, Arash Karimpour, Mohamad Shahgholi, Zhixiong li, "Thermal Conductivity Enhancement via Synthesis Produces a New Hybrid Mixture Composed of Copper Oxide and Multi‑walled Carbon Nanotube Dispersed in Wa", International journal of Thermophysics, Vol 41, 2020, PP.1-27
    Status: Unavailable PDF
4. Malakeh Malekzadeh, Shahrokh Abbasi rad, Mohamad Shahgholi, Parisa Naghdi, Marzieh sadat Hoseini, Niloofar Ayoobi yazdi, Mohammad Bagher Shiran, Hamidreza Saligheh rad, "Design and Validation of Synchronous QCT Calibration Phantom: Practical Methodology", Journal of medical imaging and radiation sciences, Vol 50-۱, 2019, PP.۱۵۷-۱۶۲
    Status: Unavailable PDF
5. Reyhaneh Azimi, Mohamad Shahgholi, Amirsalar Khandan, "Fabrication and Bio-Characterization of Reinforced Glass Ionomer Cement by Zinc Oxide and Hydroxyapatite Nanoparticles", Heliyon, Vol 10-20, 2024, PP.e39063
    Status: Unavailable PDF
6. Mostafa Yazdani, Aazam Ghassemi, Mohamad Shahgholi, Javad Jafari Fesharaki, Seyed Ali Galehdari, "Molecular Dynamics Method to Investigate the Interaction Energy and Mechanical Properties of the Reinforced Graphene Aerogel with Paraffin as The Phase Change Material in the Presence of Different External Heat Fluxes", Journal of the Taiwan Institute of Chemical Engineers, Vol 165, 2024, PP.105777
    Status: Unavailable PDF
7. Shapour Fadaei Heydari, Mohamad Shahgholi, Arash Karimipour, Mehdi Salehi, Seyed Ali Galehdari, "The Effects of Graphene Oxide Nanoparticles on the Mechanical and Thermal Properties of Polyurethane/Polycaprolactone Nanocomposites; A Molecular Dynamics Approach", Results in Engineering, Vol 24, 2024, PP.102933
    Status: Unavailable PDF
8. Aliakbar Karimipour, Mohamad Shahgholi, Ali Attaeyan, PHH Viet, Saeed Asiri, Khaled Alfawaz, Ageel Alogla, "The Effect of Initial Temperature on The Mechanical Strength of Tricalcium Phosphate/Chitosan/Silica aerogels Nanocomposites Using Molecular Dynamics Simulation", Journal of the Taiwan Institute of Chemical Engineers, Vol 164, 2024, PP.105682
    Status: Unavailable PDF
9. Saina Alasvandian, Mohamad Shahgholi, Arash Karimipour, "Investigating the Effects of Chitosan Atomic Ratio and Drug Type on Mechanical Properties of Silica Aerogel/Chitosan Nanocomposites Using Molecular Dynamics Approach", Journal of Molecular Liquids, Vol 401, 2024, PP.124639
    Status: Unavailable PDF
10. Shapour Fadaei Heydari, Mohamad Shahgholi, Mehdi Salehi, Seyed Ali Galehdari, "Effect of Polycaprolactone Percentage on Thermal and Mechanical Behavior of Polyurethane/Polycaprolactone/Graphene Oxide Nanocomposite Utilizing Molecular Dynamics Simulation", Engineering Analysis with Boundary Elements, Vol 161, 2024, PP.179-187
    Status: Unavailable PDF
11. Mehrdad Soltani, Javad Jafari Fesharaki, Seyed Ali Galehdari, Rasoul Tarkesh Esfahani, Mohamad Shahgholi, "A Comprehensive Evaluation Of The Vibration Control Approach Of The Multi-Layer Sandwich Composite Piezoelectric Micro-Beam Using Higher-Order Elasticity Theory And Surface Energy", Structures, Vol 60, 2024, PP.105880
    Status: Unavailable PDF
12. Rezvan Fada, Mohamad Shahgholi, Reyhane Azimi, Niusha Farhadi Babadi, "Estimation of Porosity Effect on Mechanical Properties in Calcium Phosphate Cement Reinforced by Strontium Nitrate Nanoparticles: Fabrication and FEM Analysis", Arabian Journal for Science and Engineering, Vol 49, 2024, PP.1825–1815
    Status: Unavailable PDF
13. Ali Attaeyan, Mohamad Shahgholi, Amirsalar Khandan, "Fabrication and characterization of novel 3D porous Titanium-6Al-4V scaffold for orthopedic application using selective laser melting technique", Iranian Journal of Chemistry and Chemical Engineering, Vol 43, 2024, PP.66-82
    Status: Unavailable PDF
14. Amin Koochaki, Mohamad Shahgholi, Mohammad Sajadi, Elmira Babadi, Mostafa Inc, "Investigation of the mechanical stability of polyethylene glycol hydrogel reinforced with cellulose nanofibrils for wound healing: Molecular dynamics simulation", Engineering Analysis with Boundary Elements, Vol 151, 2023, PP.1-7
    Status: Unavailable PDF
15. Somayeh Yaghoubi, behzad Rezaie, Mohammad Sajadi, Mohamad Shahgholi, Mostafa inc, "Developed molecular dynamics method of dissipative particle dynamics for the bench mark numerical simulation of fluid flow inside a rectangular chamber", Engineering Analysis with Boundary Elements, Vol 149, 2023, PP.112-126
    Status: Unavailable PDF
16. Ali Abdollahi, Mohammad Behzad Botlani Esfahani, Mohammad Sajadi, Ahmad Sadeghi, Mohamad Shahgholi, Arash Karimipoor, Mostafa Inc, "Experimental Study of Pool Boiling Heat Transfer Coefcient for DI‑Water‑Based Nanofuids Containing Nickel Oxide in a Constant Magnetic Field", International Journal of Thermophysics, Vol 44, 2023, PP.44-62
    Status: Unavailable PDF
17. Mostafa Mahjoory, Mohamad Shahgholi, Arash Karimipour, "Investigation on the size and percentage effects of magnesium nanoparticles on thermophysical properties of reinforced calcium phosphate bone cement by molecular dynamic simulation", Heliyon, Vol 9, 2023, PP.18835
    Status: Unavailable PDF
18. Shakour Shojaee, Mohamad Shahgholi, Arash Karimipour, "The effects of atomic percentage and size of Zinc nanoparticles, and atomic porosity on thermal and mechanical properties of reinforced calcium phosphate cement by molecular dynamics simulation", Journal of the Mechanical Behavior of Biomedical Materials, Vol 141, 2023, PP.105785
    Status: Unavailable PDF
19. Sahar Shahshahani, Mohamad Shahgholi, Arash Karimipour, "The thermal performance and mechanical stability of methacrylic acid porous hydrogels in an aqueous medium at different initial temperatures and hydrogel volume fraction using the molecular dynamics simulation", Journal of Molecular Liquids, Vol 382, 2023, PP.122001
    Status: Unavailable PDF
20. Chuan Sun, Mohamad Shahgholi, Amirali Pourazariyan, Z Li, Aliakbar Karimipour, Binh Nguyen Le, "Hydrodynamic and heat transfer investigations of multi-phase nanofluid flow in the phase change material of silver nanoparticles dispersed in water/wax-paraffin", Engineering Analysis with Boundary Elements, Vol 157, 2023, PP.167-173
    Status: Unavailable PDF
21. Somayeh Yaghoubi, Behzad Rezaye, Mohammad Sajadi, Mehdi Jamali Ghadrijani, Mohamad Shahgholi, Mostafa Inc, Armani Fatollahi, "Modification of wall particles arrangement and Schmidt number in a cavity with the movable wall via dissipative particle molecular dynamics approach", Engineering Analysis with Boundary Elements, Vol 152, 2023, PP.120-129
    Status: Unavailable PDF
22. Le Quynh Hoang, Mohammad Sajadi, Zahra Abdelmalek, Elaheh Karooby, Mehdi Jamali Ghadrejani, Amin Koochaki, Mohamad Shahgholi, Mostafa Inc, "Molecular dynamics method for numerical study of thermal performance of hexacosane PCM in a Cu-nanochannel", Engineering Analysis with Boundary Elements, Vol 151, 2023, PP.457-463
    Status: Unavailable PDF
23. Navid Habibollahi, Ali Abdollahi, Mohamad Sajadi, Davood Toghraee, Sobhan Emami, Mohamad Shahgholi, Mostafa Inc, "Molecular dynamics simulation of combustion behavior of coated aluminum hydride nanoparticles in the oxygenated medium: Effects of adding the ethanol atomic coating", Engineering Analysis with Boundary Elements, Vol 150, 2023, PP.180-186
    Status: Unavailable PDF
24. Mohamad Shahgholi, Arash Karimipour, Pouya Firouzi, Omid Malekahmadi, Majid Ghashang, Nasier Saadoon, Noor H Obaid, Shaghayegh Baghaei, "Fabrication and characterization of synthesized hydroxyapatite/ ethanolamine for bone tissue engineering application", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol 650, 2022, PP.129591
    Status: Unavailable PDF
25. Xinglong Liu, Mitra Adibi, Mohamad Shahgholi, Iskander Tlili, Mohammad Sajadi, Ali Abdollahi, Z. Li, Arash Karimipour, "Phase change process in a porous Carbon-Paraffin matrix with different volume fractions of copper oxide Nanoparticles: A molecular dynamics study", Journal of Molecular Liquids, Vol 366, 2022, PP.120296
    Status: Unavailable PDF
26. Mostafa Mahjoory, Mohamad Shahgholi, Arash Karimipour, "The effects of initial temperature and pressure on the mechanical properties of reinforced calcium phosphate cement with magnesium nanoparticles: A molecular dynamics approach", International Communications in Heat and Mass Transfer, Vol 135, 2022, PP.106067
    Status: Unavailable PDF
27. Kou Guiyue, Milad Jahanbakhsh, Mohammadali Molaee, Narges Abbasi, Mohamad ُShahgholi, inc. Mustafa, "MD analysis of heat transfer of carbon nanotube flow on nanopumping process to improve the hydrodynamic and thermal performances", Engineering Analysis with Boundary Elements, Vol 144, 2022, PP.507-517
    Status: Unavailable PDF
28. Mohamad Shahgholi, Pouya Firouzi, Omid Malekahmadi, Sepideh Vakili, Arash Karimipour, Majid Ghashang, Woorod Hussain, H Karim, Shaghayegh Baghaei, "Fabrication and characterization of nanocrystalline hydroxyapatite reinforced with silica-magnetite nanoparticles with proper thermal conductivity", Materials Chemistry and Physics, Vol 289, 2022, PP.126439
    Status: Unavailable PDF
29. H. Liang, S. Saber-samandari, M.Y.P.M. Yusef, M.H. Malekipour Esfahani, M. Shahgholi, M. Hekmatifar, R. Sabetvand, A. Khandan, D. Tokhraee, "Investigation of the effect of Berkovich and Cube Corner indentations on the mechanical behavior of fused silica using molecular dynamics and finite element simulation", Ceramics international, Vol 48-19, 2022, PP.28781-28789
    Status: Unavailable PDF
30. Shahrokh Abbasi rad, Atena Akbari, Malakeh Malekzadeh, Mohamad Shahgholi, Hosein Arabalibeik, Hamidreza Saligheh rad, "Quantifying cortical bone free water using short echo time (STE-MRI) at 1.5T", Magnetic Resonance Imaging, Vol 71, 2020, PP.17-24
    Status: Unavailable PDF
31. Mohamad shahgholi, Sara Oliviero, Francesco Baino, chiara Vitale-Brovarone, Dario Gastaldi, Pasquale Vena, "Mechanical characterization of glass-ceramic scaffolds at multiple characteristic lengths through nanoindentation", Journal of the European Ceramic Society, Vol ۳۶-9, 2016, PP.2403-2409
    Status: Unavailable PDF
32. Ali Alikhasi Habib Abadi, Mohamad Shahgholi, Hamidreza Bakhsheshi Rad, "Production and Experimental Examination of Ultravist Coated Tungsten Trioxide Nanoparticles as a Contrast Agent in Computed Tomography Imaging", Nashrieh Shimi va Mohandesi Shimi Iran, Vol 43, 2024, PP.51-61
    Status: Unavailable PDF

Conference Paper

1. Sayna Alasvandian, ُShapour Fadaie Heidari, Mohamad Shahgholi, "Investigation on mechanical properties of zinc oxide by molecular dynamics simulation method", National conference on New achievements in electrical engineering, computer engineering and medical engineering, Ashrafi Isfahani University, 2023
    Status: Unavailable PDF
2. Fatemeh Poorani, Mohamad Shahgholi, "Biomechanical simulation of three dental implant thread types and the effect on the activation of bone osteoblasts by finite elements", National conference on New achievements in electrical engineering, computer engineering and medical engineering, Ashrafi Isfahani University, 2023
    Status: Unavailable PDF
3. Rezvan Fada, Mohamad Shahgholi, "Investigation of reinforced calcium-phosphate bone cement for osteoporosis applications", 2nd national conference on health knowledge production, confronting Covid-19 and governing the post-corona world, Najafabad, 2022
    Status: Unavailable PDF
4. Mostafa Mahjoory, Mohamad Shahgholi, "Molecular dynamics simulation to investigate the effect of temperature on glycoprotein in corona virus", 2nd national conference on health knowledge production, confronting Covid-19 and governing the post-corona world, Najafabad, 2022
    Status: Unavailable PDF
5. Sara Gheisari, Mohamad Shahgholi, "Molecular dynamics simulation of the glycoprotein in the corona virus in interaction with water molecules", 2nd national conference on health knowledge production, confronting Covid-19 and governing the post-corona world, Najafabad, 2022
    Status: Unavailable PDF
6. Mahsa Talebi, Shahrokh Abbasi rad, Malakeh Malekzadeh, Mohamad Shahgholi, Kimia Foudeh, Hamidreza Salighehrad, "Variable flip angle T1 Relaxometry of cortical bone free water; correlation with themechanical compression test", Proceedings of the 28th scientific meeting of ISMRM, Paris, France, 2020
    Status: Unavailable PDF
7. Parisa Taheri, Matin Laghaei, Mohamad Shahgholi, "Investigation of the strain distribution of the bone surrounding the implant in the weak mandible using the finite element method  ", The first national conference on modern research in medical engineering  , Dezful, ۲۰۲۰
    Status: Unavailable PDF
8. Ali Bahramian, Mohamad Shahgholi, "Investigating ultrasound propagation in different parts of the body  ", The first national conference on modern research in medical engineering  , Dezful, 2020
    Status: Unavailable PDF
9. Maedeh Karimi, Matin Laghaei, Mohamad Shahgholi, "Ergonomic body simulation to assess and reduce long-term musculoskeletal disorders utilizing RULA tests", The first national conference on modern research in medical engineering  , Dezful, 2020
    Status: Unavailable PDF
10. Parisa Nikbakht, Matin Laghaei, Mohamad Shahgholi, "Finite element simulation (with real dimensions) of bone sets Phalanx, Tarsus and Metatarsus", The first national conference on modern research in medical engineering   , Dezful, 2020
    Status: Unavailable PDF
11. Nasrin Hushdar poor, Matin Laghaei, Mohamad Shahgholi, "Simulation of the fourth lumbar vertebra of the spine based on the patient Computer Tomography SCAN images to evaluate the mechanical behaviors", The first national conference on modern research in medical engineering , Dezful, 202۰
    Status: Unavailable PDF
12. Niloofar Askari, Mohamad Shahgholi, "Dynamic simulation of mandibular drilling process utilizing finite element method", The first national conference on modern research in medical engineering , Dezful, 2020
    Status: Unavailable PDF
13. Hamid Mir-Mohamad Sadeghi, Mohamad Shahgholi, " Simulation and comparison of passive and semi-active suspension systems", Conference on Mechanical Engineering, Islamic Azad university- Mashhad, 2010
    Status: Unavailable PDF
14. Mohamad Shahgholi, Mojtaba Kermani, Mohsen Loh-Moosavi, "Numerical estimation of effective height in cylindrical dental implants by finite element method", Conference on Mechanical Engineering, Islamic Azad University - Mashhad, 2010
    Status: Unavailable PDF
15. Mahboobeh Mortazavi, Mohamad Shahgholi, Ali Savadi, "Designing and manufacturing of an unmanned helicopter simulator", International conference of Iranian Aerospace Society, Malek-ashtar University of Technology, 2009
    Status: Unavailable PDF