Journal Paper

1. mojtaba sadeghi, masoud kassiri, hamid bakhsheshi, hamid ghayour, mahdi rafiei, ahmad mostafa, filip berto, "Friction welding of pure titanium-AZ31 magnesium alloy: Characterization and simulation", Engineering Failure Analysis, Vol 131, 2022, PP.1-14
    Status: Unavailable PDF
2. Behdad Garmeh, Masoud kasiri, Kamran Amini, Hamid ghayour, Hamid Reza Bakhsheshi-Rad, Filippo Berto, "Effect of Vanadium and Rare Earth on the Structure, Phase Transformation Kinetics and Mechanical Properties of Carbide-Free Bainitic Steel Containing Silicon", Applied Sciences, Vol 12, 2022, PP.1-17
    Status: Unavailable PDF
3. S. M. J. Hoseini, H Ghayour, A. S. Golazani, M K. Asgarani, I Ebrahimzadeh, "Metallurgical Aspects of the Spinning Process in Metallic Liners", Journal of Environmental Friendly Materials, Vol 15-1, 2021, PP.35-46
    Status: Unavailable PDF
4. hamid ghayour, S. M Hoseini, A Salemi Golezani, M K. Asgarani, I Ebrahimzadeh, "Investigation and Comparison of Microstructure and Mechanical Properties Between Parts of Shear Spinning and Rolled", Journal of Environmental Friendly Materials, Vol 5-2, 2021, PP.1-9
    Status: Unavailable PDF
5. Saman Karimi Haji Shoreh, Mahdi Ahmadyari-Sharamin , Hamid Ghayour, s.a Hassanzadeh-Tabrizi, Reza Pournajaf, Morteza Tayebi, "Two- stage synthesis of SnO2-Ag/MgFe2O4 nanocomposite for photocatalytic application", Surfaces and Interfaces, Vol 26, 2021, PP.1-11
    Status: Unavailable PDF
6. Seyed Mohammad Javad Hoseini, Hamid Ghayour, Ali Salemi Golazani, Masoud Kasiri Asgarani, Iman Ebrahimzadeh, "Investigation of microstructure and mechanical properties of copper shell produced by shear spinning in different rotation directions", Materials Research Express, Vol 8, 2021, PP.1-14
    Status: Unavailable PDF
7. Seyed Mohammad Javad Hoseini, Hamid Ghayour, Ali Salemi Golezani, Masoud Kasiri Asgarani, Iman Ebrahimzadeh, "EFFECT OF DIFFERENT STRAIN ROUTES ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF COPPER", Acta Metallurgica Slovaca, Vol 27-1, 2021, PP.11-16
    Status: Unavailable PDF
8. محمود رزاقی, مسعود کثیری, حمیدرضا بخششی راد, حمید غیور, "In vitro bioactivity and corrosion of PLGA/hardystonite composite-coated magnesium-based nanocomposite for implant applications", International Journal of Minerals , Metallurgy and Materials, Vol 28, 2021, PP.168-178
    Status: Unavailable PDF
9. Mojtaba Sadeghi GOGHERI, Masoud KASIRI-ASGARANI, Hamid Reza BAKHSHESHI-RAD, Hamid GHAYOUR, Mahdi RAFIEI, "Mechanical properties, corrosion behavior and biocompatibility of orthopedic pure titanium−magnesium alloy screw prepared by friction welding", Transactions of Nonferrous Metals Society of China, Vol 30-11, 2020, PP.2952-2966
    Status: Unavailable PDF
10. Mojtaba Sadeghi Gogheri, Masoud Kasiri-Asgarani, Hamid Reza Bakhsheshi-Rad, Hamid Ghayour, Mahdi Rafiei, "In Vitro Corrosion Behavior and Cytotoxicity of Polycaprolactone–Akermanite-Coated Friction-Welded Commercially Pure Ti/AZ31 for Orthopedic Applicatio", Journal of materials engineering and performance, Vol 29, 2020, PP.6053–6065
    Status: Unavailable PDF
11. Shokoh Parham, Anousheh Zargar Kharazi, Hamid Reza Bakhsheshi-Rad, Hamid Ghayour, Ahmad Fauzi Ismail, Hadi Nur, Filippo Berto, "Electrospun Nano-Fibers for Biomedical and Tissue Engineering Applications: A Comprehensive Review", materials, Vol 13 (9, 2020, PP.2153
    Status: Unavailable PDF
12. Sara Abbaspou, Amirabbas Nourbakhsh, Reza Ebrahimi, Hamid Ghayour, Kenneth J.D. Mackenzie, "The effect of nanoparticle and mesoporous TiO2 additions on the electronic characteristics of reduced graphene oxide nanocomposites with zinc oxide un", Materials Science and Engineering: B, Vol 246, 2019, PP.89–95
    Status: Unavailable PDF
13. Mahmood Razzaghi, Masoud Kasiri-Asgarani, Hamid Reza Bakhsheshi-Rad, Hamid Ghayour, "In Vitro Degradation, Antibacterial Activity and Cytotoxicity of Mg-3Zn-xAg Nanocomposites Synthesized by Mechanical Alloying for Implant Applications", Journal of Materials Engineering and Performance, Vol 28-3, 2019, PP.1441–1455
    Status: Unavailable PDF
14. J Fahim, S.M.M Hadavi, H Ghayour, S.A. Hassanzadeh Tabrizi, "Cavitation erosion behavior of super-hydrophobic coatings on Al5083 marine aluminum alloy", Wear, Vol 424–2, 2019, PP.122-132
    Status: Unavailable PDF
15. Mehdi Boroujerdnia, Hamid Ghayour, Ahmad Monshi, Reza Ebrahimi, Farid Jamali-Sheini, "The effect of pumice reinforcing particles on the corrosion-and wearresistance of Ni-Co-pumice bilayer coatings by electroplating", Materials Research Express, Vol 6, 2019, PP.1-15
    Status: Unavailable PDF
16. mehdi boroujernia, hamid ghayour, ahmad monshi, reza ebrahimi, farid jamali, "Electroplating of Ni/Co–pumice multilayer nanocomposite coatings: Effect of current density on crystal texture transformations and corrosion behavior", International Journal of Minerals, Metallurgy and Materials, Vol 26-10, 2019, PP.1299-1310
    Status: Unavailable PDF
17. jalil soleimany, hamid ghayour, kamran amini, farhad gharavi, "The Effect of Deep Cryogenic Treatment on Microstructure and Wear Behavior of H11 Tool Steel‏", Physics of Metals and Metallography, Vol 120-9, 2019, PP.969–979
    Status: Unavailable PDF
18. B mokarian, K Amini, H Ghayour, F Gharavi, "The combined effect of cryogenic and boronising treatments on the wear behaviour and microstructure of DIN 1.2344 steel‏", TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, Vol 97-3, 2019, PP.121–128
    Status: Unavailable PDF
19. M Rafiei, H Ghayour, H Mostaan, M Zavaran, "The effect of V addition on microstructure and tribological properties of Fe-Ti-C claddings produced by gas tungsten arc welding‏", Journal of Materials Processing Technology, Vol 266, 2019, PP.569-578
    Status: Unavailable PDF
20. B Garmeh, M Kasiri-Asgarani, K Amini, H Ghayour, "A Study on the Effect of Austempering Temperature on Microstructure and Mechanical Properties of DIN 36CrNiMo4 Carbide-Free Nano Bainitic Steel", Materials Performance and Characterization, Vol 8-2, 2018, PP.258-265
    Status: Unavailable PDF
21. Masoud Sehri, Hamid Ghayour, Kamran Amini, Masaab Naseri, Habib Habib, Vahid Javaeri, "Effects of cryogenic treatment on microstructure and wear resistance of Fe-0.35C-6.3Cr martensitic steel", Acta Metallurgica Slovaca, Vol 24-2, 2018, PP.134-146
    Status: Unavailable PDF
22. Javad Fahim, Hamid Ghayour, Sayed Mohammad Mehdi Hadavi, Sayed Ali Hassanzadeh Tabrizi, "Fabrication of Superhydrophobic Al5083 Aluminum Alloy for Marine Applications", Protection of Metals and Physical Chemistry of Surfaces, Vol 54-5, 2018, PP.899–908
    Status: Unavailable PDF
23. Aliakbar Najafinezhad, Majid Abdellahi, Saeed Saber-Samandari, Hamid Ghayour, Amirsalar Khandan, "Hydroxyapatite- M-type strontium hexaferrite: A new composite for hyperthermia applications", Journal of Alloys and Compounds, Vol 734, 2018, PP.290-300
    Status: Unavailable PDF
24. Majid Abdellahi, Saeid Jabbarzare, Hamid Ghayour, Amirsalar Khandan, "Thermal and X-ray analyses of aluminum–titanium nanocomposite powder", Journal of Thermal Analysis and Calorimetry, Vol 131-2, 2018, PP.853–863
    Status: Unavailable PDF
25. Aliakbar Najafinezhad, Majid Abdellahi, Saeed Saber-Samandari, Hamid Ghayour, Amirsalar Khandan, "Hydroxyapatite- M-type strontium hexaferrite: A new composite for hyperthermia applications", Journal of Alloys and Compounds, Vol 734, 2018, PP.290-300
    Status: Unavailable PDF
26. Aliakbar Najafinezhad, Majid Abdellahi, Sepideh Nasiri Harchegani, Ali Soheily, Mohammadsaleh Khezri, Hamid Ghayour, "On the synthesis of nanostructured akermanite scaffolds via On the synthesis of nanostructured akermanite scaffolds via space holder method: The ehold", Journal of the mechanical behavior of biomedical materials, Vol 69, 2017, PP.242–248
    Status: Available PDF
27. Hamid Ghayour, Majid Abdellahi, Neriman Ozada, Saeid Jabbarzare, Amirsalar Khandan, "Hyperthermia application of zinc doped nickel ferrite nanoparticles", Journal of Physics and Chemistry of Solids, Vol 111, 2017, PP.464-472
    Status: Unavailable PDF
28. Alireza Shayan, Majid Abdellahi, Fazlollah Shahmohammadian, Saeid Jabbarzare, Amirsalar Khandan, Hamid Ghayour, "Mechanochemically aided sintering process for the synthesis of barium ferrite: Effect of aluminum substitution on microstructure, magnetic properties ", Journal of Alloys and Compounds, Vol 708, 2017, PP.538-546
    Status: Unavailable PDF
29. Majid Abdellahi, Aliakbar Najafinezhad, Hamid Ghayour, Saeed Saber-Samandari, Amirsalar Khandan, "Preparing diopside nanoparticle scaffolds via space holder method: Simulation of the compressive strength and porosity", Journal of the Mechanical Behavior of Biomedical Materials, Vol 72, 2017, PP.171-181
    Status: Unavailable PDF
30. Aliakbar Najafinezhad, Majid Abdellahi, Hamid Ghayour, Ali Soheily, Akbar Chami, Amirsalar Khandan, "A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics", Materials Science , Vol 72, 2017, PP.259–267
    Status: Unavailable PDF
31. Saeid Jabbarzare, Majid Abdellahi, Hamid Ghayour, Asiyeh Arpanahi, Amirsalar Khandan, "A study on the synthesis and magnetic properties of the cerium ferrite ceramic", Journal of Alloys and Compounds, Vol 694, 2017, PP.800-807
    Status: Unavailable PDF
32. Hamid Ghayour, Majid Abdellahi, Maryam Bahmanpour, "Simulation of thermoelectric materials efficiency: The case study of Sr1−xYxTiO3 thermoelectric ceramic", Ceramics International, Vol 42, 2016, PP.7259–7269
    Status: Unavailable PDF
33. Hamid ghayour, majid abdellahi, maryam bahmanpoor, "Optimization of the high energy ball-milling: Modeling and parametric study", Powder Technology, Vol 291, 2016, PP.7–13
    Status: Available PDF
34. Hamid Ghayour, Amin Nekoubin, Amir Abbas Nourbakhsh, "An Investigation of Growth Time of Homoepitaxial Synthesis of ZnO Nanorods via Hydrothermal Method", Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, Vol 46, 2016, PP.975-982
    Status: Unavailable PDF
35. Elias Rezvani, Hamid Ghayour, Masoud Kasiri, "Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallization", Mechanical Sciences, Vol 7, 2016, PP.85-91
    Status: Unavailable PDF
36. hamid Ghayour, Majid Abdellahi, "A brief review of the effect of grain size variation on the electrical properties of BaTiO3-based ceramics", Powder Technology, Vol 292, 2016, PP.84-93
    Status: Unavailable PDF
37. Rahman Sabouhi, Hamid Ghayour, Majid Abdellahi, Maryam Bahmanpour, "Measuring the mechanical properties of polymer–carbon nanotube composites by artificial intelligence", International Journal of Damage Mechanics, Vol 25-4, 2016, PP.538–556
    Status: Unavailable PDF
38. Amirsalar Khandan, Majid Abdellahi, Neriman Ozada, Hamid Ghayour, "Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-nanocomposite coating", Journal of the Taiwan Institute of Chemical Engineers, Vol 60, 2016, PP.538-546
    Status: Unavailable PDF
39. saeid Jabbarzare, Majid Abdellahi, Hamid Ghayour, Akbar Chami, Shayesteh Hejazian, "Mechanochemically assisted synthesis of yttrium ferrite ceramic and its visible light photocatalytic and magnetic properties", Journal of Alloys and Compounds, Vol 688, 2016, PP.1125-1130
    Status: Unavailable PDF
40. Hamid Ghayour, Majid Abdellahi, Maryam Bahmanpour, "Artificial intelligence and ceramic tools: Experimental study, modeling and optimizing", Ceramics International, Vol 41, 2015, PP.13470–13479
    Status: Unavailable PDF
41. Majid Abdellahi, Hamid Ghayour, Maryam Bahmanpour, "Effect of process parameters and synthesis method on the performance of thermoelectric ceramics: A novel simulation", Ceramics International, Vol 41, 2015, PP.6991–6998
    Status: Unavailable PDF
42. kamran Amini, Mehran Negahbani, Hamid Ghayour, "The effect of deep cryogenic treatment on hardness and wear behavior of the H13 tool steel", Metallurgia Italiana, Vol 3, 2015, PP.3-8
    Status: Available PDF
43. Leila Shams Solareea, Ahmad Monshi, Hamid Ghayour, "A new approach for the fabrication of hydrophobic silica coatings on glass using sol–gel method", Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, Vol 45-12, 2015, PP.1769-1772
    Status: Unavailable PDF
44. masoud Sehri, Hamid Ghayour, Kamran Amini, Mosab Naseri, Habibollah Rastegari, Vahid Javaheri, "Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel", International Journal of Iron , Vol 12-2, 2015, PP.17-23
    Status: Unavailable PDF
45. farhad karimkhani, Hamid Ghayour, Behnaz Boka, "Effect of Titania Colloid Solution Concentration on Hydrophobicity of Well-Aligned TiO 2 Nanorods Synthesized via Hydrothermal Method ", Journal of Advanced Materials and Processing, Vol 2-1, 2014, PP.13-18
    Status: Unavailable PDF
46. Amin Nekoubin, Hamid Ghayour, mojtaba Nasr, "An illustration of photocatalytic properties of ZnO nanorods array films", Journal of Advanced Materials and Processing, Vol 1-1, 2013, PP.39-45
    Status: Unavailable PDF
47. A.H. Bahrami, H Ghayour, S. Sharafi, "Evolution of microstructural and magnetic properties of mechanically alloyed Fe80 − xNi20Six nanostructured powders", Powder Technology, Vol 249, 2013, PP.7-14
    Status: Unavailable PDF
48. M Jahanian, H Ghayour, M Kasiri, "The effect of pulsed gas tungsten arc welding optimize protection with electrodes coated steel St 37 Nob73G2", New processes, materials engineering, Vol 10-1, 2016, PP.137-147
    Status: Unavailable PDF
49. علی کریمی, تقی دلالی اصفهانی, حمید غیور, فضل الله شاه محمدیان, "Effect of heat treatment on the microstructure and tribological properties of tungsten and iron Nayhard 4", Journal of New Materials, Vol 6-4, 2016, PP.13-28
    Status: Unavailable PDF
50. H Ghayour, A Nekoubin, A Nourbakhsh, "Coated zinc oxide nanowires on the electrode array of interwoven gold and investigation of nano-sensor alcoholic gases", New processes, materials engineering, Vol 10-2, 2016, PP.13-22
    Status: Unavailable PDF
51. Hassan Sharifi, Danial Davoodi, Hamid Ghayour, "Investigating the physical and surface properties at high temperature of the Al/SiC nanocomposite produced by powder metallurgy", Journal of Science and technology of composites, Vol 2-1, 2015, PP.33-40
    Status: Unavailable PDF
52. Morteza Tayebi, Hassan Sharifi, Hamid Ghayour, "Characterization of thermal cycles and investigation of thermal expansion behavior of the Al-4%Cu composite alloy reinforced by SiC particles", Journal of Science and Technology of Composites, Vol 2-2, 2015, PP.55-62
    Status: Unavailable PDF
53. Hamid Reza Momeni, Kamran Amini, Habibollah Rastegari, Hamid Ghayour, Mosab Naseri, "Improve of wear resistance of O.35%C- 6%Cr Martensite", Quarterly new processes in materials engineering, Vol 9-4, 2016, PP.237-248
    Status: Unavailable PDF
54. Morteza Tayebi, Hassan sharifi, Hamid Ghayour, "Thermal Expansion of Al-4%Cu/SiC by powder metallurgy", International Journal of Advanced Design and Manufacturing Technology, Vol 9-1, 1394, PP.179-191
    Status: Unavailable PDF
55. behnaz Boka, hamid ghayour, farhad karimkhani, "effect of seed layer thickness ZnO", Journal of modern processes in materials engineering, Vol 9-1, 2015, PP.211-221
    Status: Unavailable PDF
56. Iman Zehtabchi, Hamid Ghayour, mahmood Zendedel, "Optimization of Parameters from Perovskite Solar Cells by ZnO Aligned Nanorods", Journal of Advanced Materials and Technologies , Vol 4-3, 2015, PP.53-64
    Status: Unavailable PDF
57. Hassan Sharifi, Hossien Rafiei, Hamid Ghayour, Mehdi Alizadeh, "The effect of volume fraction on mechanical properties and surface Sylysm carbide nanoparticles nanocomposite Al / SiCp produced by powder metallurgy", nano materials, Vol 22-7, 2015, PP.123-132
    Status: Unavailable PDF
58. lila shams, Ahmad monshi, Hamid Ghayour, "Synthesis of Hydrophobic Silica Coatings on Glass by Sol-Gel and Studying Silver Oxide Effect on the Wettability", Journal of Advanced materials and Technologies, Vol 2-3, 2013, PP.60-68
    Status: Unavailable PDF

Conference Paper