Journal Paper

1. Ehsan Kianpour, Razavi Dehkordi Seyyed Muhammad Hossein , Che Sidik Nor Azwadi, " NUMERICAL SIMULATION OF MHD NANOFLUID FORCED CONVECTION HEAT TRANSFER IN A RECTANGULAR ENCLOSURE WITH VARIABLE PARAMETERSTERS ", Innovative Mechanical Engineering., Vol (2)3, 2024, PP.43-55
    Status: Unavailable PDF
2. Hossein ABUTORABI, Ehsan KIANPOUR, "Modeling exergy analysis and optimization of cement plant industry", Journal of Mechanical and Energy Engineering, Vol 6/46, 2022, PP.55-66
    Status: Unavailable PDF
3. Nor Azwadi Che sidik, Ehsan kianpour, "Influence of Compound Spherical Trenched Holes on Film Cooling Performance at the end of Combustor Simulator", Journal of Advanced Research in Applied Sciences and Engineering Technology, Vol 28, 2022, PP.13-24
    Status: Unavailable PDF
4. Ehsan Kianpour, Nor Azwadi Che Sidik, Seyyed Muhammad Hossein Razavi Dehkordi, Siti Nurul Akmal Yusof, "Numerical Simulation of Steady and Unsteady Flow and Entropy Generation by Nanofluid Within a Sinusoidal Channel", Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol 89-2, 2022, PP.25-42
    Status: Unavailable PDF
5. E Kianpour, N Che sidik, "Cooling holes with different structures effects on coolant cross flow", Journal of Mechanical and Energy Engineering, Vol 5-45, 2021, PP.141-148
    Status: Unavailable PDF
6. Ali Akbar Rashidi, Ehsan Kianpour, "Investigation of natural convection heat transfer of MHD hybrid nanofluid in a triangular enclosure", Journal of Computational and Applied Research in Mechanical Engineer, Vol 10-2, 2021, PP.539-549
    Status: Unavailable PDF
7. Milad Darabi Borujeni, Ehsan Kianpour, "Cooling a hot obstacle in a rectangular enclosure by using a MHD nanofluid with variable properties", Journal of Computational and Applied Research in Mechanical Engineering, Vol 10-1, 2020, PP.101-110
    Status: Unavailable PDF
8. Nor Azwadi Che Sidik, Ehsan Kianpour, "Effects of Row Trench Holes Geometries on an Endwall Cooling", CFD Letters, Vol 11-6, 2019, PP.27-38
    Status: Unavailable PDF
9. Ehsan Kianpour, Nor Azwadi Che Sidik, "A Detailed Study of Effects of Row Trenched Holes at the Combustor Exit on Film Cooling Effectiveness", Journal of the Serbian Society for Computational Mechanics, Vol 11-1, 2017, PP.59-68
    Status: Unavailable PDF
10. Ehsan Kianpour, nor Azwadi Che Sidik, Seyyed Mohammd Hussein Razavi Dehkordi, Mohammad Akbari, Masoud Afrand, Iman Gol Shokouh, "Thermodynamic analyzes of film cooling for a restructured cooling holes at the end of gas turbine engine combustor", International Journal of Mechanics , Vol 9, 2015, PP.11-15
    Status: Available PDF
11. Golshokouh Iman, Syahrullail Samion, Kianpour Ehsan , "Palm Fatty Acid as a New Renewable Source for Industrial Lubricant", EUROPEAN ONLINE JOURNAL OF NATURAL AND SOCIAL SCIENCES, Vol 3, 2014, PP.383-389
    Status: Available PDF
12. Shahin Salimi, Alireza Fazeli, Ehsan Kianpour, "Film Cooling Effectiveness Using Cylindrical and Compound Cooling Holes at the End Wall of Combustor Simulator", Advanced Research in Fluid Mechanics and Thermal Sciences, Vol 1, 2014, PP.38-43
    Status: Available PDF
13. Salimi Shahin, Kianpour Ehsan, Fazeli Alireza, "Compound Cooling Holes for Film Cooling of Combustor Simulator: A Review", Journal of Advanced Review on Scientific Research, Vol 1-1, 2014, PP.10-15
    Status: Available PDF
14. Ehsan Kianpour, Golshokouh Iman, "The Effects of Row Trench Holes with Alignment Angle of 60 Degrees on Film Cooling Effectiveness at Low Blowing Ratios", Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol 4, 2014, PP.24-35
    Status: Available PDF
15. Nor Azwadi Che Sidik, Ehsan Kianpour, "Film-Cooling Techniques at the End of Combustor and Inlet of Turbine in a Gas Turbine Engine: A Review", Applied Mechanics and Materials, Vol 554, 2014, PP.236-240
    Status: Available PDF
16. Nor Azwadi Che Sidik, Ehsan Kianpour, "Computational Investigation of Film Cooling from Cylindrical and Row Trenched Cooling Holes near the Combustor End wall", Applied Mechanics and Materials, Vol 554, 2014, PP.225-229
    Status: Available PDF
17. Ehsan Kianpour, Nor Azwadi Che Sidik, Iman Golshokouh, "Measurements of Film Effectiveness for Cylindrical and Row Trenched Cooling Holes at Different Blowing Ratios", NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, Vol 66, 2014, PP.1154-1171
    Status: Available PDF
18. Nor Azwadi Che Sidik, Ehsan Kianpour, "Film Cooling using Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90 Degree at Different Blowing Ratios", Mathematical problem in engineering, Vol -, 2014, PP.1-9
    Status: Available PDF
19. Iman Golshokouh, Mohammad Ali Golshokouh, Farid Nasir Ani, Ehsan Kianpour, Samion Syahrullail , "Investigation of physical properties for jatropha oil in different temperature as lubricant oil", Life Science Journal, Vol 10, 2013, PP.110-119
    Status: Unavailable PDF
20. Ehsan Kianpour, Nor Azwadi Che Sidik, Mazlan Abdul wahid, "Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90 Degrees at Different Blowing Ratios", CFD Letters, Vol 5, 2013, PP.165-173
    Status: Available PDF
21. Ehsan Kianpour, Nor Azwadi che Sidik, Syahrullail Samion, "A Comparison of Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90 Degree Near the Combustor Endwall", International Review of Mechanical Engineering, Vol 7, 2013, PP.1223-1228
    Status: Available PDF
22. Nor Azwadi Che Sidik, Ehsan Kianpour, Iman Golshokouh, "Dynamic and Thermodynamic Analysis of Film-Cooling", International Review of Mechanical Engineering, Vol 7, 2013, PP.570-577
    Status: Available PDF
23. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, "Thermodynamic analysis of flow field at the end of combustor simulator", International Journal of Heat and Mass Transfer, Vol 61, 2013, PP.389-396
    Status: Available PDF
24. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, "Dynamic Analysis of Flow Field at the End of Combustor Simulator", Jurnal Teknologi, Vol 58, 2012, PP.5-12
    Status: Available PDF
25. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, "Thermodynamic Analysis of Flow Field at the End of Combustor Simulator", Applied Mechanics and Materials, Vol 225, 2012, PP.261-266
    Status: Unavailable PDF
26. Ehsan Kianpour, Nor Azwadi Che Sidik, Iman Golshokouh, "Film Cooling Effectiveness in a Gas Turbine Engine: A Review", jurnal teknologi, Vol 71, 2014, PP.25–35
    Status: Available PDF
27. Ehsan Kianpour, Nor Azwadi Che Sidik, "Computational investigation of film cooling from cylindrical and row trenched cooling holes near the combustor endwall", Case Studies in Thermal Engineering, Vol 4, 2014, PP.76–84
    Status: Available PDF

Conference Paper

1. Ehsan Kianpour, Nor Azwadi Che Sidik, "Thermodynamic analyses of film cooling from compound spherical trenched hoes at the end of combustor simulator", Ninth Fuel and Combustion Conference of Iran, Shiraz, 2022
    Status: Unavailable PDF
2. Iman Golshokouh, Samion Syahrullai, Ehsan Kianpour, "Palm Fatty Acid as New Renewable Source for industrial lubricant", The Iranian National Conference on Environment and Energy, safashahr, 2014
    Status: Available PDF
3. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, "Thermodynamic Analysis of Flow Field at the End of Combustor", AEROTECH IV, Kuala Lumpour, Malaysia, 2012
    Status: Unavailable PDF