Journal Paper

1. Mojtaba Sadeghi Gogheri, Masoud Kasiri-Asgarani, Hamid Reza Bakhsheshi- Rad, Hamid Ghayour, Mahdi Rafiei, Ahmad Mostafa, Filippo Berto, "Friction welding of pure titanium-AZ31 magnesium alloy: Characterization and simulation", Engineering Failure Analysis, Vol 131, 2022, PP.105799
    Status: Unavailable PDF
2. Farzad Badkoobeh, Hossein Mostaan, Mahdi Rafiei, Hamid Reza Bakhsheshi-Rad, Filippo Berto, "Friction Stir Welding Processing of MgBased Alloys A Critical Review on Advancements and Challenges", Materials, Vol 14, 2021, PP.6726
    Status: Unavailable PDF
3. Mohammad Hossein Ataei, Seyed Ali Hassanzadeh-Tabrizi, Mahdi Rafiei, Ahmad Monshi, "Delamination Detection in a Laminated Carbon Composite Plate Using Lamb Wave by Lead-Free Piezoceramic Transducers", Journal of Advanced Materials and Processing, Vol 9-3, 2021, PP.3-14
    Status: Unavailable PDF
4. Sadegh Varmaziar, Hossein Mostaan, Mahdi Rafiei, Mahdi Yeganeh, "Welding and Corrosion Behavior of aisi h13 Welds: The effect of filler metal on the Microstructural evolutions", ARCHIVES OF METALLURGY AND MATERIALS, Vol 66, 2021, PP.839-846
    Status: Unavailable PDF
5. Ehsan Baharzadeh, Morteza Shamanian, Mahdi Rafiei, Hossein Mostaan, Jerzy A Szpunar, "EBSD study of dissimilar transient liquid phase joining of duplex stainless steel SAF 2205 to nickel-based superalloy IN X-750", Welding in the World, Vol 65, 2021, PP.721-730
    Status: Unavailable PDF
6. Mohsen Eshaghpour, Iman , Mahdi Ebrahimzadeh, "Enhanced Surface Properties of Plain Carbon Steel by Duplex Process of Friction Stir Processing and Plasma Nitriding", Journal of Materials Engineering and Performance, Vol 30-4, 2021, PP.2991-3002
    Status: Unavailable PDF
7. Ali Izadi Ghahferokhi, Masoud Kasiri-Asgarani, Kamran Amini, Reza Ebrahimi-kahrizsangi, Mahdi Rafiei, "Evolution of microstructure and mechanical properties on dissimilar transient liquid phase (TLP) bonding of GTD-111 and IN-718 by BNi-9 (AWS A5.8/A5.8", Welding in the World, Vol 65, 2021, PP.329-343
    Status: Unavailable PDF
8. Mahdi Rafiei, Mehrdad Javadi, Hossein Mostaan, Ahmad Reza Abbasian, "The role of Si on solidification behaviour of the NiAl intermetallic cladding produced by the GTAW process", Canadian Metallurgical Quarterly, Vol 59-3, 2020, PP.262-269
    Status: Unavailable PDF
9. Ehsan Baharzadeh, Morteza Shamanian, Mahdi Rafiei, Hossein Mostaan, "Microstructural and mechanical evaluations of TLP bonded In X-750/BNi-3/SAF 2205", Materials Engineering and Performance, Vol 29-2, 2020, PP.1090-1100
    Status: Unavailable PDF
10. Hossein Mostaan, Mahdi Rafiei, Mohammad Mahdi Oraei, Ehsan Baharzadeh, "The effect of microstructure on Magnetic Properties of TLP bonded Sm2Co17 Hard Magnets", Applied Physics A, Vol 126, 2020, PP.408
    Status: Unavailable PDF
11. Mahdi Rafiei, Mohammad Ahmadnezhad, Hossein Mostaan, Ali Saeidi, "Reaction mechanism in SiO2-MnO2-Fe-Al system for producing ferrosilicomanganese powder", Advanced Powder Technology, Vol 31-7, 2020, PP.2613-2617
    Status: Unavailable PDF
12. Mohammad Jafari, Mahdi Rafiei, Hossein Mostaan, "Efect of Solidifcation Mode on Microstructure and Mechanical Properties of AISI420 Steel to SAF2507 Steel Dissimilar Joint Produced by Transient Liqui", Metals and Materials International, Vol 26, 2020, PP.1533-1544
    Status: Unavailable PDF
13. Mojtaba Sadeghi Gogheri, Masoud Kasiri-Asgarani, Hamid Reza Bakhsheshi-Rad, Hamid Ghayour, Mahdi Rafiei, "In Vitro Corrosion Behavior and Cytotoxicity of Polycaprolactone–Akermanite-Coated Friction-Welded Commercially Pure Ti/AZ31 for Orthopedic Applicatio", Journal of Materials Engineering and Performance, Vol 29, 2020, PP.6053-6065
    Status: Unavailable PDF
14. Mohammad Emadi, Hossein Mostaan, Mahdi Rafiei, "Experimental Investigation on the dissimilar laser weld joints between Inconel 625 Superalloy and AISI 430 Ferritic Stainless Steel", Journal of Advanced Materials and Processing, Vol 8-1, 2020, PP.3-19
    Status: Unavailable PDF
15. Mojtaba Sadeghi Gogheri, Masoud Kasiri, Hamid Reza Bakhsheshi Rad, Hamid Ghayour, Mahdi Rafiei, "Mechanical properties, corrosion behavior and biocompatibility of orthopedic pure titanium−magnesium alloy screw prepared by friction welding", Transactions of Nonferrous Metals Society of China, Vol 30-11, 2020, PP.2952-2966
    Status: Unavailable PDF
16. Reza Beygi, Majid Zarezadeh, Hossein Mostaan, Mahdi Rafiei, Ahmad Reza Abbasian, "Synthesis of a NiTi2–AlNi–Al2O3 nanocomposite by mechanical alloying and heat treatment of Al–TiO2–NiO", International Journal of Minerals, Metallurgy and Materials, Vol 26-3, 2019, PP.345-349
    Status: Unavailable PDF
17. Ali Reza Yazdani, Mahdi Rafiei, "Characterization and Wear Properties of Fe3Al and (Fe,Ti)3Al Intermetallic Claddings Produced by GTAW Process", Protection of Metals and Physical Chemistry of Surfaces, Vol 55-6, 2019, PP.1142-1147
    Status: Unavailable PDF
18. Mahdi Rafiei, Hossein Mostaan, "The effect of filler metal and butter layer on microstructural and mechanical properties of pure Cu to AISI304 stainless steel dissimilar joint", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol 233-9, 2019, PP.1894–1905
    Status: Unavailable PDF
19. Ehsan Baharzadeh, Morteza Shamanian, Mahdi Rafiei, Hossein Mostaan, "Properties of IN X-750/BNi-2/SAF 2205 joints formed by transient liquid phase bonding", Journal of Materials Processing Technology., Vol 274, 2019, PP.116297
    Status: Unavailable PDF
20. Behnam Sadeghi, Hassan Sharifi, Mahdi Rafiei, Ahmad Reza Abbasian, Ehsan Saeb-noori, "Microstructural, mechanical and corrosion properties of dissimilarjoint between AISI A321 stainless steel and ASTM A537CL1structural steel produced by", Metallurgical Research and Technology, Vol 116-4, 2019, PP.1-11
    Status: Unavailable PDF
21. Mahdi Oraei, Hossein Mostaan, Mahdi Rafiei, Ahmad Reza Abbasian, Majid Zarezadeh, "Investigation into microstructural evolutions, mechanical properties and thermal analysis of Al(Zn)/Al2O3 nano-composite fabricated by mechanical mill", Materials Research Express, Vol 6, 2019, PP.0865g9
    Status: Unavailable PDF
22. Mohammad Hossein Ataei, Seyyed Ali Hassanzadeh-Tabrizi, Mahdi Rafiei, Ahmad Monshi, "Design development of (Ba1-xCax)(Ti1-ySny)O3 lead-free piezo ceramic by two manufacturing methods of CSS and SPS, promising for delamination damage de", Journal of Alloys and Compounds, Vol 795, 2019, PP.197-206
    Status: Unavailable PDF
23. Mojgan Hadian, Hamzeh Shahrajabian, Mahdi Rafiei, "Mechanical properties and microstructure of Al/(TiC TiB2) composite fabricated by spark plasma sintering", Ceramics International, Vol 45-9, 2019, PP.12088–12092
    Status: Unavailable PDF
24. Mahdi Rafiei, Hossein Mostaan, Farshid Abbasi, Ali Hamzelu, Mahdi Oraei, "Mechanochemical assisted synthesis of NiAl and Ni2AlSi intermetallic: a comparative study on the corrosion behavior", Materials Research Express, Vol 6-3, 2019, PP.036515
    Status: Unavailable PDF
25. Mahdi Rafiei, Hamid Ghayour, Hossein Mostaan, Mohammad Zavaran Hosseini, "The effect of V addition on microstructure and tribological properties of Fe- Ti-C claddings produced by gas tungsten arc welding", Journal of Materials Processing Technology, Vol 266, 2019, PP.569-578
    Status: Unavailable PDF
26. Hossein Mostaan, Mahdi Rafiei, "PREDICTION AND OPTIMIZATION OF MAGNETIC PROPERTIES OF LASER WELDED AISI 430 STAINLESS STEELS", Archives of Metallurgy and Materials, Vol 63-4, 2018, PP.1673-1682
    Status: Unavailable PDF
27. Behnam Sadeghi, Hassan Sharifi, Mahdi Rafiei, Morteza Tayebi, "Effects of post weld heat treatment on residual stress and mechanical properties of GTAW: The case of joining A537CL1 pressure vessel steel and A321 a", Engineering Failure Analysis, Vol 94, 2018, PP.396-406
    Status: Unavailable PDF
28. Iman Rasouli, Mahdi Rafiei, "The effect of chemical composition of filler metal on properties of dissimilar joint between AISI316 and AISI430 steels welded by GTAW", Metallurgical Engineering, Vol 21-1, 2018, PP.55-71
    Status: Unavailable PDF
29. Hossein Mostaan, Masoud Pourkabirian, Mahdi Rafiei, "The Interface Structure in Dissimilar Welding of AISI 4130 to AISI 316L Steels Using ERNiCr-3 Filler Metal", International Journal of Iron and Steel Society of Iran, Vol 15-1, 2018, PP.1-8
    Status: Unavailable PDF
30. Mahdi Oraei, Hossein Mostaan, Mahdi Rafiei, "The effect of Al2O3 reinforcement particles on the corrosion behavior of Al(Zn) solid solution matrix", International Journal of Materials Research, Vol 109-1, 2018, PP.1020-1026
    Status: Unavailable PDF
31. Majid Zarezadeh, Hossein Mostaan, Reza Beygi, Mahdi Rafiei, Ahmad Reza Abbasian, "Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al–C–TiO2 Powder Mixture", Russian Journal of Non-Ferrous Metals, Vol 59-1, 2018, PP.117-122
    Status: Unavailable PDF
32. Majid Jafari, Javad Mostaghimi, Hossein Monajatizadeh, Mahdi Rafiei, "Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method", Surface Engineering, Vol 34-3, 2018, PP.220-225
    Status: Unavailable PDF
33. Hossein Mostaan, Majid Zarezadeh, Reza Beygi, Mahdi Rafiei, Ahmadreza Abbasian, "Response to comments from M. Sharifitabar on the paper “Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/", Ceramics International, Vol 43-11, 2017, PP.8544
    Status: Unavailable PDF
34. Mahdi Rafiei, Morteza Shamanian, Hossein Mostaan, Mehdi Salehi, "Tribological properties of B4C–TiB2–TiC–Ni cermet coating produced by HVOF", International Journal of Materials Research, Vol 108-8, 2017, PP.681-687
    Status: Unavailable PDF
35. Hossein Mostaan, Majid Zarezadeh, Mahdi Rafiei, Reza Beygi, Ahma dreza Abbasian, "Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite", Ceramics International, Vol 43-2, 2017, PP.2680-2685
    Status: Unavailable PDF
36. Hossein Mostaan, Mahdi Rafiei, Fathallah Karimzadeh, "The effect of mechanical activation on the kinetic and formation mechanism of a niobium aluminide based nanocomposite", Journal of Advanced Materials and Processing, Vol 4-3, 2016, PP.59-68
    Status: Unavailable PDF
37. Hamid Raza Bakhsheshi rad, Majid Abdellahi, E Hamzah, M Daroonparvar, Mahdi Rafiei, "Introducing a composite coating containing CNTs with good corrosion properties: characterization and simulation", RSC Advances, Vol 6, 2016, PP.108498-108512
    Status: Unavailable PDF
38. Mohammad Reza Loghman-Estarki, Mahdi Rafiei, "Synthesis and characterization of mercaptoacetic acid/lead sulfide inorganic/organic nanocomposite", Journal of Materials Science: Materials in Electronics, Vol 27-12, 2016, PP.12852-12859
    Status: Unavailable PDF
39. Mahdi Rafiei, Morteza Shamanian, Mehdi Salehi, Hossein Mostaan, "Tribological Properties of B4C-Ni Cermet Coating Produced By HVOF Process on the Surface of 4130 Steel", International Journal of Iron , Vol 13-2, 2016, PP.19-25
    Status: Unavailable PDF
40. Mahdi Rafiei, Mohammad Hosein Enayati, Fathallah Karimzadeh, "Kinetic analysis of thermite reaction in Al", Powder Technology, Vol 253, 2014, PP.553-560
    Status: Unavailable PDF
41. Mahdi Rafiei, Mehdi Salehi, Morteza Shamanian, Amir Motallebzadeh, "Preparation and oxidation behavior of B4C-Ni and B4C-TiB2-TiC-Ni composite coatings produced by an HVOF process", Ceramics International, Vol 40, 2014, PP.13599-13609
    Status: Unavailable PDF
42. Mahdi Rafie, Morteza Shamanian, Mehdi Salehi, Amir Motallebzadeh, "Improvement in oxidation behaviour of steel by B4C-TiB2-TiC-Ni coating", Surface Engineering, Vol 30, 2014, PP.791-795
    Status: Unavailable PDF
43. Mahdi Rafiei, Mehdi Salehi, Morteza Shamanian, "Formation mechanism of B4C-TiB2-TiC ceramic powder produced by mechanical alloying of Ti-B4C powders", Advanced Powder Technology, Vol 25, 2014, PP.1754-1760
    Status: Unavailable PDF
44. Mahdi Rafiei, Mohammad Hosein Enayati, Fathallah Karimzadeh, "Thermodynamic analysis of solid solution formation in the nanocrystalline Fe", Journal of Chemical Thermodynamics, Vol 59, 2013, PP.243-249
    Status: Unavailable PDF
45. Mahdi Rafiei, Saeed Khademzadeh, Nader Parvin, "Characterization and formation mechanism of nanocrystalline W", Journal of Alloys and Compounds, Vol 489, 2010, PP.224-227
    Status: Unavailable PDF
46. Mahdi Rafiei, Mohammad Hosein Enayati, Fathallah Karimzadeh, "The effect of Ti addition on alloying and formation of nanocrystalline structure in Fe", Journal of Materials Science, Vol 45, 2010, PP.4058-4062
    Status: Unavailable PDF
47. Mahdi Rafiei, Mohammad Hosein Enayati, Fathallah Karimzadeh, "Mechanochemical synthesis of (Fe,Ti)3Al", Journal of Alloys and Compounds, Vol 488, 2010, PP.147-144
    Status: Unavailable PDF
48. Mahdi Rafiei, Mohammad Hosein Enayati, Fathallah Karimzadeh, "Characterization and formation mechanism of nanocrystalline (Fe,Ti)3Al intermetallic compound prepared by mechanical alloying", Journal of Alloys and Compounds, Vol 480, 2009, PP.392-396
    Status: Unavailable PDF
49. Mohammad Reza samadi, Hossein mostaan, Mahdi Rafiei, Mostafa Salehi, "A study on the effect of pulsed current gas tungsten arc welding parameters on the microstructural evolutions, corrosion behavior and mechanical prope", Journal of Welding Science and Technology of Iran, Vol 6-1, 2020, PP.133-146
    Status: Unavailable PDF
50. Mahdi Rafiei, Mohammad Jafari, Hossein Mostaan, "Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process", Journal of Advanced Materials in Engineering (Esteghlal), Vol 39-2, 2020, PP.65-80
    Status: Unavailable PDF
51. Mohammad Emadi, Hossein Mostaan, Mahdi Rafiei, "Evaluation of microstructure and corrosion behavior of dissimilar laser joint between Inconel 625 and AISI 430 ferritic stainless steel", Journal of Welding Science and Technology of Iran, Vol 5-2, 2020, PP.109-127
    Status: Unavailable PDF
52. Abbas Rostami, Mahdi Rafiei, "The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process", Novel Materials, Vol 10-1, 2019, PP.149-162
    Status: Unavailable PDF
53. Omid Tavakkoli, Mahdi Rafiei, "Dissimilar Joint Properties of Cu to 304 Stainless Steel by GTAW Process", Metallurgical and Materials Engineering, Vol 30-2, 1398, PP.21-30
    Status: Unavailable PDF
54. Mahdi Rafiei, Hossein Mostaan, Sepehr Etemadi, "Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW", Advanced Materials and Novel Coatings, Vol 7-28, 2019, PP.2048-2059
    Status: Unavailable PDF
55. Mohammad Javad Rajabloo, Mahdi Rafiei, Hossein Mostaan, "Simulation of Wear Behavior of AISI 4130 Steel Against Al2O3 Ball", Journal of Metallurgical and Materials Engineering, Vol 30-1, 2018, PP.141-154
    Status: Unavailable PDF
56. Mahdi Rafiei, Mehrdad Javadi, Hossein Mostaan, Ahmad Reza Abbasian, "Production and characterization of Ni2AlSi nanocrystalline intermetallic compound via mechanical alloying process", Metallurgical Engineering, Vol 21-4, 2019, PP.284-291
    Status: Unavailable PDF
57. Hossein Mostaan, Mahdi Rafiei, Mohammad Hassan Abbasi, Fatallah Karimzadeh, "Study and investigation on the formation of NbAl3-based nanocomposite reinforced by Al2O3 particles: microstructural and thermal analysis investigatio", Novel Processes in Materials Science, Vol 12-2, 2018, PP.51-61
    Status: Unavailable PDF
58. Iman Rasouli, Mahdi Rafiei, "Evaluation of dissimilar joint properties of AISI316 to AISI430 stainless steels produced by GTAW", Journal of Welding Science and Technology of Iran, Vol 4-2, 2019, PP.111-126
    Status: Unavailable PDF
59. Behnam Sadeghi, Hasan Sharifi, Mahdi Rafiei, "Evaluation of dissimilar joint properties of A321 austenitic stainless steel to A537CL1 carbon steel by GTAW process", Journal of Welding Science and Technology of Iran, Vol 3-1, 2017, PP.10-20
    Status: Unavailable PDF
60. Masoud Pourkabirian, Hossein Mostaan, Mahdi Rafiei, "The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint", Journal of Advanced Materials in Engineering, Vol 36-2, 2017, PP.33-46
    Status: Unavailable PDF
61. Mahdi Rafiei, Mohmmad Hossein Enayati, Fatallah Karimzadeh, "Synthesis and characterization of (Fe,Ti)3Al-Al2O3 nanocomposite via Fe2O3 reduction by Al", Novel Processes in Materials Engineering, Vol 11-2, 2017, PP.77-86
    Status: Unavailable PDF
62. Behnam Sadeghi, Hassan SHarifi, Mahdi Rafiei, "The effect of AC and pulse currents on the microstructure and mechanical properties of carbon steel to austenitic stainless steel dissimilar joint", Metallurgical Engineering, Vol 20-1, 2017, PP.37-45
    Status: Unavailable PDF

Conference Paper

1. Ehsan Baharzadeh, Morteza Shamanian, Mahdi Rafiei, Hossein Mostaan, "SEBD Study and simulation of residual stresses in dissimilar transient liquid phase joining of SAF 2205 duplex stainless steel to", 3rd International Conference on Welding and Non-Destructive Testing of Iran, 21st National Conference on Welding and Inspection and 10th National Conf, Isfahan University of Technology, 2021
    Status: Unavailable PDF
2. Ahmad Reza Vakili, Abdilvahhab Adabavazeh, Mahdi Rafiei, Ahmad Reza Karimian, "Evaluation of microstructure of A516 sheet joint cladded with Monel and martensitic stainless steel for using in power plan towers", 19th conference on welding and inspection, Maleke Ashtar University of Technology, 2019
    Status: Unavailable PDF
3. Ali Akbar Noroozi Larki, Khalil Ranjbar, Seyyed Mohsen Sadrosadat, Mahdi Rafiei, "Effect of pulse duration on joint properties of laser welded Zr 702 ", International conference on materials engineering and metallurgy , Tehran, 2019
    Status: Unavailable PDF
4. Ali akbar Noroozi, Khalil Ranjbar, Seyyed Mohsen Sadrosadat, Mahdi Rafiei, "Effect of pulse duration on joint properties of laser welded Hastalloy C-276", International conference on materials engineering and metallurgy, Tehran, 2019
    Status: Unavailable PDF
5. Mohammad Emadi, Hossein Mostaan, Mahdi Rafiei, "Evaluation of structural and mechanical properties of dissimilar joint between Inconel 625 and 430 steel", 18th national conference on welding and inspection and the 7th National Conference on Nondestructive Testing, Arak University, 2018
    Status: Unavailable PDF
6. Hossein Akbari, Peyman Karimi, Hossein Mostaan, Mahdi Rafiei, Ali Sonboli, "Evaluation of resistance spot welding parameters on mechanical properties and fracture mode in dissimilar welding between 304 stainless steel and bras", 18 th national conference on welding and inspection and the 7th National Conference on Nondestructive Testing, Arak University, 2018
    Status: Unavailable PDF
7. Mohammad Ahmad Nejhad, Ali Saeidi, Mahdi Rafiei, "Production of Ferrosilicomanganese without C via combustion synthesis and MA ", Steel symposium , Tabriz, 2017
    Status: Unavailable PDF
8. Mahdi Rafiei, Hossein Mostaan, "Mechanical alloying of Fe, Al and TiO2 system to produce (Fe,Ti)3Al-Al2O3 nanocomposite", 1ST International Symposium on Nanotechnology, Islamic Azad University-Najafabad branch, 2016
    Status: Available PDF
9. Mahdi Rafiei, Morteza Shamanian, Mehdi Salehi, "Synthesis and characterization of B4C-TiB2-TiC nanocomposite by mechanical alloying process", 1ST International Symposium on Nanotechnology, Islamic Azad University, Najafabad Branch, 2016
    Status: Available PDF
10. Behnam Sadeghi, Hassan Sharifi, Mahdi Rafiei, "Comparison between the effect of alternative and pulse currents on mechanical and microstructural properties of carbon steel to stainless steel dissim", Second International Conference on Welding and Non Destructive Teting, Olympic Hotel, Tehran, 2016
    Status: Unavailable PDF
11. M.H. Enayati, F. Karimzadeh, "MA behavior of Fe-Al-Ti system to produce nanocrystalline (Fe,Ti)3Al intermetallic compound ", Proceedings of the 3rd Conference on Nanostructures (NS2010), Kish Island, I.R. Iran, 2010
    Status: Available PDF
12. , , "-", -, -, -
    Status: Available PDF
13. , , "-", -, -, -
    Status: Available PDF