مقالات ارائه شده در مجلات علمی پژوهشی

1. حسین ابوترابی, احسان کیانپور, "Modeling exergy analysis and optimization of cement plant industry", Journal of Mechanical and Energy Engineering, Vol 6/46, 2022, PP.55-66
    Status: Unavailable PDF
2. نور ازوادی چی سیدیک, احسان کیانپور, "Influence of Compound Spherical Trenched Holes on Film Cooling Performance at the end of Combustor Simulator", Journal of Advanced Research in Applied Sciences and Engineering Tec, Vol 28, 2022, PP.13-24
    Status: Unavailable PDF
3. احسان کیانپور, نور ازوادی چی سیدیک, سید محمد حسین رضوی دهکردی, سیتی نورول اکمل یوسف, "Numerical Simulation of Steady and Unsteady Flow and Entropy Generation by Nanofluid Within a Sinusoidal Channel", Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol 89-2, 2022, PP.25-42
    Status: Unavailable PDF
4. احسان کیانپور, نور چی سیدیک, "Cooling holes with different structures effects on coolant cross flow", Journal of Mechanical and Energy Engineering, Vol 5-45, 2021, PP.141-148
    Status: Unavailable PDF
5. علی اکبر رشیدی, احسان کیانپور, "Investigation of natural convection heat transfer of MHD hybrid nanofluid in a triangular enclosure", مجله تحقيقات محاسباتي و کاربردي در مهندسي مکانيک, Vol 10-2, 2021, PP.539-549
    Status: Unavailable PDF
6. میلاد دارابی بروجنی, احسان کیانپور, "Cooling a hot obstacle in a rectangular enclosure by using a MHD nanofluid with variable properties", مجله تحقيقات محاسباتي و کاربردي در مهندسي مکانيک, Vol 10-1, 2020, PP.101-110
    Status: Unavailable PDF
7. نور ازوادی چی سیدیک, احسان کیانپور, "Effects of Row Trench Holes Geometries on an Endwall Cooling", CFD Letters, Vol 11-6, 2019, PP.27-38
    Status: Unavailable PDF
8. احسان کیانپور, نور ازوادی چی سیدیک, "A Detailed Study of Effects of Row Trenched Holes at the Combustor Exit on Film Cooling Effectiveness", Journal of the Serbian Society for Computational Mechanics, Vol 11-1, 2017, PP.59-68
    Status: Unavailable PDF
9. احسان کیانپور, نور ازوادی چی سیدیک, سید محمد حسین رضوی دهکردی, محمد اکبری, مسعود افرند, ایمان گل شکوه, "Thermodynamic analyzes of film cooling for a restructured cooling holes at the end of gas turbine engine combustor", International Journal of Mechanics , Vol 9, 2015, PP.11-15
    Status: Available PDF
10. ایمان گل شکوه, سامیون سیاهرولاییل, احسان کیانپور, "Palm Fatty Acid as a New Renewable Source for Industrial Lubricant", EUROPEAN ONLINE JOURNAL OF NATURAL AND SOCIAL SCIENCES, Vol 3, 2014, PP.383-389
    Status: Available PDF
11. شاهین سلیمی, علیرضا فاضلی, احسان کیانپور, "راندمان لايه خنک کننده با استفاده از سوراخ هاي حلقوي و ترکيبي در ناحيه انتهايي محفظه احتراق", Advanced Research in Fluid Mechanics and Thermal Sciences, Vol 1, 2014, PP.38-43
    Status: Available PDF
12. شاهین سلیمی, احسان کیانپور, علیرضا قاضلی, "سوراخ هاي خنک کننده ترکيبي براي لايه خنک کننده يک محفظه احتراق شبيه سازي شده: مروري بر مطالب گذشتگان", Journal of Advanced Review on Scientific Research, Vol 1-1, 2014, PP.10-15
    Status: Available PDF
13. احسان کیانپور, ایمان گلشکوه, "تاثير سوراخ هاي ترنچ شده خطي با زاويه 60 درجه بر راندمان لايه خنک کننده در نسبت هاي پاشش پايين", Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol 4, 2014, PP.24-35
    Status: Available PDF
14. Nor Azwadi Che Sidik, Ehsan Kianpour, "Film-Cooling Techniques at the End of Combustor and Inlet of Turbine in a Gas Turbine Engine: A Review", Applied Mechanics and Materials, Vol 554, 2014, PP.236-240
    Status: Available PDF
15. Nor Azwadi Che Sidik, Ehsan Kianpour, "Computational Investigation of Film Cooling from Cylindrical and Row Trenched Cooling Holes near the Combustor End wall", Applied Mechanics and Materials, Vol 554, 2014, PP.225-229
    Status: Available PDF
16. Ehsan Kianpour, Nor Azwadi Che Sidik, Iman Golshokouh, "Measurements of Film Effectiveness for Cylindrical and Row Trenched Cooling Holes at Different Blowing Ratios", NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, Vol 66, 2014, PP.1154-1171
    Status: Available PDF
17. Nor Azwadi Che Sidik, Ehsan Kianpour, "Film Cooling using Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90 Degree at Different Blowing Ratios", Mathematical problem in engineering, Vol -, 2014, PP.1-9
    Status: Available PDF
18. Iman Golshokouh, Mohammad Ali Golshokouh, Farid Nasir Ani, Ehsan Kianpour, Samion Syahrullail , "Investigation of physical properties for jatropha oil in different temperature as lubricant oil", Life Science Journal, Vol 10, 2013, PP.110-119
    Status: Unavailable PDF
19. Ehsan Kianpour, Nor Azwadi Che Sidik, Mazlan Abdul wahid, "Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90 Degrees at Different Blowing Ratios", CFD Letters, Vol 5, 2013, PP.165-173
    Status: Available PDF
20. Ehsan Kianpour, Nor Azwadi Che Sidik, Syahrullail Samion, "A Comparison of Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90 Degree Near the Combustor Endwall", International Review of Mechanical Engineering, Vol 7, 2013, PP.1223-1228
    Status: Available PDF
21. Nor Azwadi Che Sidik, Ehsan Kianpour, Iman Golshokouh, "Dynamic and Thermodynamic Analysis of Film-Cooling", International Review of Mechanical Engineering, Vol 7, 2013, PP.570-577
    Status: Available PDF
22. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, "Thermodynamic analysis of flow field at the end of combustor simulator", International Journal of Heat and Mass Transfer, Vol 61, 2013, PP.389-396
    Status: Available PDF
23. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, "Dynamic Analysis of Flow Field at the End of Combustor Simulator", Jurnal Teknologi, Vol 58, 2012, PP.5-12
    Status: Available PDF
24. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, "Thermodynamic Analysis of Flow Field at the End of Combustor Simulator", Applied Mechanics and Materials, Vol 225, 2012, PP.261-266
    Status: Unavailable PDF
25. احسان کیانپور, نور ازوادی چی سیدیک, ایمان گل شکوه, "مروري بر راندمان لايه خنک کننده در يک موتور توربين گاز", jurnal teknologi, Vol 71, 1393, PP.25-35
    Status: Available PDF
26. احسان کیانپور, نور ازوادی چی سیدیک, "بررسي محاسباتي لايه خنک کننده از سوراخ هاي حلقوي و سوراخ هاي ترنچ شده خطي در مجاورت ديواره محفظه احتراق", Case Studies in Thermal Engineering , Vol 4, 1393, PP.76-84
    Status: Available PDF

مقالات ارائه شده در کنفرانسهای بین المللی

1. احسان کیانپور, نور ازودای چی سیدیک, , "تجزيه و تحليل ترموديناميکي خنک کننده فيلم از هيل هاي ترانشه دار کروي ترکيبي در انتهاي شبيه ساز احتراق ", نهمين کنفرانس سوخت و احتراق ايران , شيراز, 1400
    Status: Unavailable PDF
2. ایمان گل شکوه, سامیون سیاهرل لاییل, احسان کیانپور, , "روغن پالم چرب منبع جديد تجديدپذير براي روغنکاري صنعتي", The Iranian National Conference on Environment and Energy, صفاشهر شيراز, 1393
    Status: Available PDF
3. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, , "Thermodynamic Analysis of Flow Field at the End of Combustor", AEROTECH IV, Kuala Lumpour, Malaysia, 2012
    Status: Unavailable PDF