| Row |
Article title |
Journal Name |
Year |
Issue/Volume |
Article Printed Pages |
| 1 |
Fabrication of Ti2AlC Compound by Mechanical Alloying and Spark Plasma Sintering and Investigation of Its Cyclic Oxidation Behavior |
Journal of Materials Engineering and Performance |
2023 |
32/19 |
8846–8857 |
| 2 |
Microstructural evolutions and mechanical properties of TLP‑bonded WC‑Co/St52 with copper interlayer |
Welding in the World |
2023 |
67/10 |
2411–2421 |
| 3 |
A Study on Phase Evolutions and Tensile-Shear Performance of Dissimilar Resistance Spot Welds Formed Between AISI 430 Ferritic Stainless Steel and AISI 321 Austenitic Stainless Stee |
Journal of Materials Engineering and Performance |
2023 |
32/11 |
5042–5028 |
| 4 |
Microstructure and tensile-shear behavior of dissimilar resistance spot welds between 2304 duplex stainless steel and Inconel 718 superalloy |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
2023 |
237-5 |
1124-1136 |
| 5 |
Additive manufacturing of biodegradable magnesium-based materials: Design strategies, properties, and biomedical applications |
Journal of Magnesium and Alloys |
2023 |
11-3 |
801-839 |
| 6 |
Synthesis of Z-scheme g-C3N4/WO3 nano-photocatalyst with superior antibacterial characteristics for wastewater treatment |
Journal of Sol-Gel Science and Technology |
2023 |
105 |
212-219 |
| 7 |
Friction welding of pure titanium-AZ31 magnesium alloy: Characterization and simulation |
Engineering Failure Analysis |
2022 |
131 |
105799 |
| 8 |
Microstructural Characteristics and Strengthening Mechanisms of Ferritic |
Metals |
2022 |
12 |
101 |
| 9 |
Role of interlayer composition in microstructure and mechanical properties during dissimilar transient liquid phase bonding of GTD-111/IN-718 superalloys |
Transactions of Nonferrous Metals Society of China |
2022 |
32-3 |
908-926 |
| 10 |
Effects of Graphene Nanoplatelets on the Microstructure, Mechanical Properties, and Corrosion Behavior of Spark Plasma Sintered Al 20 vol.% (TiC TiB2) Hybrid Composites |
Journal of Materials Engineering and Performance |
2022 |
31-5 |
3535–3549 |
| 11 |
Nanoscale Tribological Properties of Nanostructure Fe3Al and (Fe,Ti)3Al Compounds Fabricated by Spark Plasma Sintering Method |
Metals |
2022 |
12 |
1077 |
| 12 |
Synthesis of g-C3N4/ZnO/WO3 nanocomposite as a highly efficient antibacterial adsorbent for water treatment |
Diamond and Related Materials |
2022 |
130 |
109506 |
| 13 |
Characterization of Al/(TiC TiB2) hybrid composites containing different amounts of MWCNTs produced by SPS |
Journal of Materials Research |
2022 |
37-21 |
3575-3586 |
| 14 |
Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal |
Journal of Advanced Materials and Processing |
2022 |
10-4 |
3-11 |
| 15 |
Effect of bonding temperature and bonding time on microstructure of dissimilar transient liquid phase bonding of GTD111/BNi-2/IN718 system |
Journal of Materials Research and Technology |
2022 |
21 |
2178-2190 |
| 16 |
Facile thermal synthesis of g–C3N4/ZnO nanocomposite with antibacterial properties for photodegradation of Methylene blue |
Materials Research Express |
2021 |
8-2 |
125002 |
| 17 |
Friction Stir Welding Processing of MgBased Alloys A Critical Review on Advancements and Challenges |
Materials |
2021 |
14 |
6726 |
| 18 |
Delamination Detection in a Laminated Carbon Composite Plate Using Lamb Wave by Lead-Free Piezoceramic Transducers |
Journal of Advanced Materials and Processing |
2021 |
9-3 |
3-14 |
| 19 |
Welding and Corrosion Behavior of aisi h13 Welds: The effect of filler metal on the Microstructural evolutions |
ARCHIVES OF METALLURGY AND MATERIALS |
2021 |
66 |
839-846 |
| 20 |
EBSD study of dissimilar transient liquid phase joining of duplex stainless steel SAF 2205 to nickel-based superalloy IN X-750 |
Welding in the World |
2021 |
65 |
721-730 |
| 21 |
Enhanced Surface Properties of Plain Carbon Steel by Duplex Process of Friction Stir Processing and Plasma Nitriding |
Journal of Materials Engineering and Performance |
2021 |
30-4 |
2991-3002 |
| 22 |
Evolution of microstructure and mechanical properties on dissimilar transient liquid phase (TLP) bonding of GTD-111 and IN-718 by BNi-9 (AWS A5.8/A5.8 |
Welding in the World |
2021 |
65 |
329-343 |
| 23 |
Mechanical properties, corrosion behavior and biocompatibility of orthopedic pure titanium−magnesium alloy screw prepared by friction welding |
Transactions of Nonferrous Metals Society of China |
2020 |
30-11 |
2952-2966 |
| 24 |
Microstructural and mechanical evaluations of TLP bonded In X-750/BNi-3/SAF 2205 |
Materials Engineering and Performance |
2020 |
29-2 |
1090-1100 |
| 25 |
The effect of microstructure on Magnetic Properties of TLP bonded Sm2Co17 Hard Magnets |
Applied Physics A |
2020 |
126 |
408 |
| 26 |
Reaction mechanism in SiO2-MnO2-Fe-Al system for producing ferrosilicomanganese powder |
Advanced Powder Technology |
2020 |
31-7 |
2613-2617 |
| 27 |
The role of Si on solidification behaviour of the NiAl intermetallic cladding produced by the GTAW process |
Canadian Metallurgical Quarterly |
2020 |
59-3 |
262-269 |
| 28 |
Efect of Solidifcation Mode on Microstructure and Mechanical Properties of AISI420 Steel to SAF2507 Steel Dissimilar Joint Produced by Transient Liqui |
Metals and Materials International |
2020 |
26 |
1533-1544 |
| 29 |
In Vitro Corrosion Behavior and Cytotoxicity of Polycaprolactone–Akermanite-Coated Friction-Welded Commercially Pure Ti/AZ31 for Orthopedic Applicatio |
Journal of Materials Engineering and Performance |
2020 |
29 |
6053-6065 |
| 30 |
Experimental Investigation on the dissimilar laser weld joints between Inconel 625 Superalloy and AISI 430 Ferritic Stainless Steel |
Journal of Advanced Materials and Processing |
2020 |
8-1 |
3-19 |
| 31 |
Properties of IN X-750/BNi-2/SAF 2205 joints formed by transient liquid phase bonding |
Journal of Materials Processing Technology. |
2019 |
274 |
116297 |
| 32 |
Characterization and Wear Properties of Fe3Al and (Fe,Ti)3Al Intermetallic Claddings Produced by GTAW Process |
Protection of Metals and Physical Chemistry of Surfaces |
2019 |
55-6 |
1142-1147 |
| 33 |
The effect of filler metal and butter layer on microstructural and mechanical properties of pure Cu to AISI304 stainless steel dissimilar joint |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS |
2019 |
233-9 |
1894–1905 |
| 34 |
Microstructural, mechanical and corrosion properties of dissimilarjoint between AISI A321 stainless steel and ASTM A537CL1structural steel produced by |
Metallurgical Research and Technology |
2019 |
116-4 |
1-11 |
| 35 |
Investigation into microstructural evolutions, mechanical properties and thermal analysis of Al(Zn)/Al2O3 nano-composite fabricated by mechanical mill |
Materials Research Express |
2019 |
6 |
0865g9 |
| 36 |
Design development of (Ba1-xCax)(Ti1-ySny)O3 lead-free piezo ceramic by two manufacturing methods of CSS and SPS, promising for delamination damage de |
Journal of Alloys and Compounds |
2019 |
795 |
197-206 |
| 37 |
Mechanical properties and microstructure of Al/(TiC TiB2) composite fabricated by spark plasma sintering |
Ceramics International |
2019 |
45-9 |
12088–12092 |
| 38 |
Synthesis of a NiTi2–AlNi–Al2O3 nanocomposite by mechanical alloying and heat treatment of Al–TiO2–NiO |
International Journal of Minerals, Metallurgy and Materials |
2019 |
26-3 |
345-349 |
| 39 |
Mechanochemical assisted synthesis of NiAl and Ni2AlSi intermetallic: a comparative study on the corrosion behavior |
Materials Research Express |
2019 |
6-3 |
036515 |
| 40 |
The effect of V addition on microstructure and tribological properties of Fe- Ti-C claddings produced by gas tungsten arc welding |
Journal of Materials Processing Technology |
2019 |
266 |
569-578 |
| 41 |
Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method |
Surface Engineering |
2018 |
34-3 |
220-225 |
| 42 |
Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al–C–TiO2 Powder Mixture |
Russian Journal of Non-Ferrous Metals |
2018 |
59-1 |
117-122 |
| 43 |
The Interface Structure in Dissimilar Welding of AISI 4130 to AISI 316L Steels Using ERNiCr-3 Filler Metal |
International Journal of Iron and Steel Society of Iran |
2018 |
15-1 |
1-8 |
| 44 |
Effects of post weld heat treatment on residual stress and mechanical properties of GTAW: The case of joining A537CL1 pressure vessel steel and A321 a |
Engineering Failure Analysis |
2018 |
94 |
396-406 |
| 45 |
The effect of Al2O3 reinforcement particles on the corrosion behavior of Al(Zn) solid solution matrix |
International Journal of Materials Research |
2018 |
109-1 |
1020-1026 |
| 46 |
The effect of chemical composition of filler metal on properties of dissimilar joint between AISI316 and AISI430 steels welded by GTAW |
Metallurgical Engineering |
2018 |
21-1 |
55-71 |
| 47 |
PREDICTION AND OPTIMIZATION OF MAGNETIC PROPERTIES OF LASER WELDED AISI 430 STAINLESS STEELS |
Archives of Metallurgy and Materials |
2018 |
63-4 |
1673-1682 |
| 48 |
Tribological properties of B4C–TiB2–TiC–Ni cermet coating produced by HVOF |
International Journal of Materials Research |
2017 |
108-8 |
681-687 |
| 49 |
Response to comments from M. Sharifitabar on the paper “Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/ |
Ceramics International |
2017 |
43-11 |
8544 |
| 50 |
Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite |
Ceramics International |
2017 |
43-2 |
2680-2685 |
| 51 |
Introducing a composite coating containing CNTs with good corrosion properties: characterization and simulation |
RSC Advances |
2016 |
6 |
108498-108512 |
| 52 |
The effect of mechanical activation on the kinetic and formation mechanism of a niobium aluminide based nanocomposite |
Journal of Advanced Materials and Processing |
2016 |
4-3 |
59-68 |
| 53 |
Synthesis and characterization of mercaptoacetic acid/lead sulfide inorganic/organic nanocomposite |
Journal of Materials Science: Materials in Electronics |
2016 |
27-12 |
12852-12859 |
| 54 |
Tribological Properties of B4C-Ni Cermet Coating Produced By HVOF Process on the Surface of 4130 Steel |
International Journal of Iron |
2016 |
13-2 |
19-25 |
| 55 |
Formation mechanism of B4C-TiB2-TiC ceramic powder produced by mechanical alloying of Ti-B4C powders |
Advanced Powder Technology |
2014 |
25 |
1754-1760 |
| 56 |
Improvement in oxidation behaviour of steel by B4C-TiB2-TiC-Ni coating |
Surface Engineering |
2014 |
30 |
791-795 |
| 57 |
Preparation and oxidation behavior of B4C-Ni and B4C-TiB2-TiC-Ni composite coatings produced by an HVOF process |
Ceramics International |
2014 |
40 |
13599-13609 |
| 58 |
Kinetic analysis of thermite reaction in Al |
Powder Technology |
2014 |
253 |
553-560 |
| 59 |
Thermodynamic analysis of solid solution formation in the nanocrystalline Fe |
Journal of Chemical Thermodynamics |
2013 |
59 |
243-249 |
| 60 |
Characterization and formation mechanism of nanocrystalline W |
Journal of Alloys and Compounds |
2010 |
489 |
224-227 |
| 61 |
The effect of Ti addition on alloying and formation of nanocrystalline structure in Fe |
Journal of Materials Science |
2010 |
45 |
4058-4062 |
| 62 |
Mechanochemical synthesis of (Fe,Ti)3Al |
Journal of Alloys and Compounds |
2010 |
488 |
144-147 |
| 63 |
Characterization and formation mechanism of nanocrystalline (Fe,Ti)3Al intermetallic compound prepared by mechanical alloying |
Journal of Alloys and Compounds |
2009 |
480 |
392-396 |
| 64 |
Optimization of TIG repair welding process parameters to obtain maximum tensile strength in AZ91C magnesium alloy |
Welding Science and Technology of Iran |
2022 |
7-2 |
59-72 |
| 65 |
Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process |
Journal of Advanced Materials in Engineering (Esteghlal) |
2020 |
39-2 |
65-80 |
| 66 |
A study on the effect of pulsed current gas tungsten arc welding parameters on the microstructural evolutions, corrosion behavior and mechanical prope |
Journal of Welding Science and Technology of Iran |
2020 |
6-1 |
133-146 |
| 67 |
Evaluation of microstructure and corrosion behavior of dissimilar laser joint between Inconel 625 and AISI 430 ferritic stainless steel |
Journal of Welding Science and Technology of Iran |
2020 |
5-2 |
109-127 |
| 68 |
The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process |
Novel Materials |
2019 |
10-1 |
149-162 |
| 69 |
Dissimilar Joint Properties of Cu to 304 Stainless Steel by GTAW Process |
Metallurgical and Materials Engineering |
1398 |
30-2 |
21-30 |
| 70 |
Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW |
Advanced Materials and Novel Coatings |
2019 |
7-28 |
2048-2059 |
| 71 |
Study and investigation on the formation of NbAl3-based nanocomposite reinforced by Al2O3 particles: microstructural and thermal analysis investigatio |
Novel Processes in Materials Science |
2018 |
12-2 |
51-61 |
| 72 |
Evaluation of dissimilar joint properties of AISI316 to AISI430 stainless steels produced by GTAW |
Journal of Welding Science and Technology of Iran |
2019 |
4-2 |
111-126 |
| 73 |
Production and characterization of Ni2AlSi nanocrystalline intermetallic compound via mechanical alloying process |
Metallurgical Engineering |
2019 |
21-4 |
284-291 |
| 74 |
Simulation of Wear Behavior of AISI 4130 Steel Against Al2O3 Ball |
Journal of Metallurgical and Materials Engineering |
2018 |
30-1 |
141-154 |
| 75 |
Evaluation of dissimilar joint properties of A321 austenitic stainless steel to A537CL1 carbon steel by GTAW process |
Journal of Welding Science and Technology of Iran |
2017 |
3-1 |
10-20 |
| 76 |
The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint |
Journal of Advanced Materials in Engineering |
2017 |
36-2 |
33-46 |
| 77 |
Synthesis and characterization of (Fe,Ti)3Al-Al2O3 nanocomposite via Fe2O3 reduction by Al |
Novel Processes in Materials Engineering |
2017 |
11-2 |
77-86 |
| 78 |
The effect of AC and pulse currents on the microstructure and mechanical properties of carbon steel to austenitic stainless steel dissimilar joint |
Metallurgical Engineering |
2017 |
20-1 |
37-45 |
